Catalogs >
Ambrell >
EASYHEAT® 4.2 to 10 kW

EASYHEAT® 4.2 to 10 kW
2Pages

Catalog excerpts

EASYHEAT® 4.2 to 10 kW Induction Heating Systems Ambrell INDUCTION HEATING SOLUTIONS EASYHEAT LI induction heating systems are a reliable, compact solution for heating parts with a quick, clean source of heat. With a movable workhead that can be located up to 3m (10’) from the power supply, it is ideal for repeatable, non-contact heating of parts. Equipped to operate over a broad frequency range (150-400 kHz), EASYHEAT is ideal for heating parts of many geometries and compositions with precise power control within 50 W resolution. Avoid time-consuming changeovers with agile tuning for single-cycle and continuous heating operations. One system can supply deep, bulk heating for brazing and soldering for more shallow, concentrated heating for case-hardening for smaller parts. Flameless, non-contact induction heating minimizes energy waste by focusing energy only on the part and zone to be heated. Select and monitor power levels from the front panel LCD and sealed touch pad. Remote power control is available for employing contact inputs, analog inputs or optional serial data port. Easily control the length of the heating cycle with a built-in programmable digital timer. EASYHEAT LI is a water-cooled system, requiring connection to a heat exchanger or other mechanism for dissipating heat. Versatile • Efficient heating of many geometries • Repeatable, reliable heating with agile frequency tuning • Movable workhead; up to 3m (10’) • Remote serial operation or logging (optional) • Two 3-language display suites • Field-calibration capable Easy-to-Use • Self-adjusting for accurate, repeatable results • View set-point, output, frequency and timer • Built-in timer, stop-watch • Push-button RF control Compact and Light • Smallest feature-rich 10 kW model EASYHEAT features a front panel programmable controller allowing you to define up to four different heating profiles, each with up to five time/power steps. OPTIONS AND ACCESSORIES • Heat exchanger or chiller • Optical pyrometer (closed-loop temperature control) • External controller (plc) • Extended work head cable lengths • Footswitch • Serial data interface • Pendant station • Start-up assistance

Open the catalog to page 1

1) Line levels: [230 V] or 440 V 2) System includes workhead 3) Level determined by model; range factory set per order; field selectable 4) De-rates linearly from 10 kW, 12.4 kVA to 205 Vac to 9.1 kW, 11.3 kVA at 187 Vac ^Ambrell INDUCTION HEATING SOLUTIONS an inTEST Company RF Output, terminals (cover removed) |Terminals Circuit Breaker System Water Work Head Water Signal Stud Safety Stud G Vis it our extens ive library of Application Notes at: www.ambrell.com Ambrell, Ltd. United Kingdom Tel: +44 1242 514042 Fax: +31 546 788 154 sales-uk@ambrell.com 411-0075-10 Rev J © 2019 All...

Open the catalog to page 2