EASYHEAT® 1.2 to 2.4 kW Induction Heating Systems Ambrelt INDUCTION HEATING SOLUTIONS The compact EASYHEAT induction heating systems are a reliable solution for heating parts with a quick, clean source of heat. With a movable work head that can be located up to 3m (10’) from the power supply, it is ideal for repeatable, non-contact heating of parts. Equipped to operate over a broad frequency range (150-400 kHz), EASYHEAT is ideal for heating parts of many geometries and compositions with precise power control within 25 W resolution. Avoid time-consuming changeovers with agile tuning for single-cycle and continuous heating operations. One system can supply deep, bulk heating for brazing and soldering for more shallow, concentrated heating for case-hardening for smaller parts. Flameless, non-contact induction heating minimizes energy waste by focusing energy only on the part and zone to be heated. Select and monitor power levels from the front panel LCD and sealed touch pad. Remote power control is available for employing contact inputs, analog inputs or optional serial data port. Easily control the length of the heating cycle with a built-in programmable digital timer. EASYHEAT is a water-cooled system, requiring connection to a heat exchanger or other mechanism for dissipating heat. Versatile • Efficient heating of many geometries • Repeatable, reliable heating with agile frequency tuning • Movable workhead; up to 3m (10’) • Remote serial operation or logging (optional) • Five language display suite (EN, FR, IT, DE, ES) • Field-calibration capable Easy-to-Use • Self-adjusting for accurate, repeatable results • View set-point, output, frequency and timer • Built-in timer, stop-watch • Push-button RF power control Compact and Light • Smallest feature-rich 2.4 kW model EASYHEAT features a front panel programmable controller allowing you to define up to four different heating profiles, each with up to five time/power steps. OPTIONS AND ACCESSORIES • Heat exchanger or chiller • Optical pyrometer (closed-loop temperature control) • External controller (plc) • Extended work head cable lengths • Footswitch • Serial data interface • Pendant station • Start-up assistance

1) Factory set 2) System includes workhead 411-0050-10 Rev J ©2019 All information subject to change without notice. Two Application Specific Work Heads LEFT Water outlet Terminals lains breaker Heat sink © 'Vis it our extens ive libra iy of Application Notes at: www.ambrell.com Ambrell INDUCTION HEATING SOLUTIONS an inTEST Company www.ambrell.com Ambrell Corporation United States Tel: +1 585 889 9000 Fax: +1 585 889 4030 [email protected] Ambrell, Ltd. United Kingdom Tel: +44 1242 514042 Fax: +44 1242 224146 [email protected]