61 Series
2Pages

{{requestButtons}}

Catalog excerpts

61 Series - 1

Multi Stack Filter Housing The 61 Series multi cartridge housing is available with 3, 5, 7, 10, 12, 15, 18, 19 and 22 element stacks up to 40” long. The top opening style is equipped with a Cast Vee* clamp as standard for pressures up to 10 bar g. These housings are widely used where low capital cost is of prime importance. Being floor mounted and therefore free standing, these housings will suit most pre-filtration applications. Bolted closures are an option available for all models. The 61 Series will accept either standard Double Open End or Single Open End cartridges. This includes the full range of Amazon and industry standard cartridges ranging from 0.1 to 500µm with nominal lengths of 10, 20, 30 and 40”. Accessories available include pressure gauge and vent valve kits, drain valves and bolt down plates. * Rathmann type clamp standard on 19 and 22 stack vessels Note: 7, 12, 18 and 22 only accept 65mm maximum diameter cartridges. Part Number Pressure Gauge and Vent Valve Kit Pressure Gauge and Auto Vent Valve Kit Ball Valve and Nipple Product Features • Free standing, easy to install design Universal cup allows the use of plug • in (Code 3 and Code 8) or DOE cartridge styles in the same housing • Vee clamp closures use unique ‘W’ style seal for reliable leak free operation (Not available on 6119/22) High quality cast Vee band clamps • for safetyand security (Not available on 6119) • Cast compression nut with integral PTFE washer for easy, hand tight cartridge sealing • Wide range of connection sizes and types, cartridge lengths and materials of construction • WRAS Approved product Integral vent, clean and dirty drain sockets to aid efficient filter changeout Universal cup enables choice of plug in (Code 3 and Code 8) or DOE cartridge styles in the same housing Every housing is etched with a unique serial number for full traceability Available in 316L Stainless Steel Full housing customisation service available Internally and externally electropolished as standard WRAS Approved product Product Range Amazon Filters design and manufacture an extensive range of liquid filtration systems, providing one of the widest selections of filtration vessels, depth filters and pleated cartridges available today, ensuring excellent process and filter compatibility. As one of Europe’s leading manufacturers of filtration systems, Amazon Filters is able to offer a solution to meet all filtration requirements. Amazons’ filters are manufactured in clean room conditions and all products come with detailed Product Validation Guide

Open the catalog to page 1
61 Series - 2

Maximum Operating Conditions Liquids: Vee clamp: Bolted closure: Gases: Vee clamp: Bolted closure: Temperature Range: Materials of Construction Body: Closure: Vessel Finish: 316L St.Steel Vee Clamp - 304 St.Steel Screw Clamp - Zinc plated carbon steel (Optional Stainless Steel) Electropolished Connections Inlet/Outlet: Vent: Drain: PED Status: Fluid Groups: Marking: Compliant with 2014/68/EU Liquids Group 2 Gas Group 2 CE Marked ATEX: Compliant with 2014/34/EU, level CE Ex II 2 GD c X Technical drawings for each individual housing showing dimensions, volume, weights, maximum temperatures...

Open the catalog to page 2

All Amazon Filters Ltd catalogs and technical brochures

  1. SupaSpun II

    2 Pages