The new roller shells consist of: ¡ Shell ¡ Clamping ring ¡ Rim with bearing assembly The roller shells are directly pushed on the roller rim and fastened by means of a conical clamping ring. When changing the roller shell, the rim with integrated bearing assembly must not be dismounted. AMANDUS KAHL GmbH & Co. KG Dieselstrasse 5-9 D-21465 Reinbek / Hamburg Phone: +49 (0)40 727 71 - 0 Fax: +49 (0)40 727 71 - 100 [email protected] www.akahl.de bearings ¡ Easy assembly of the shells resulting in a significant time saving ¡ Removal of the bearing assembly not required ¡ Significant saving of valuable lubricants ¡ Optional: permanent lubrication Roller shells with a diameter from 450 mm onwards can be used for the following axle diameters: ¡ 110 mm ¡ 140 mm Roller width: ¡ 156 mm ¡ 192 mm Roller shells can be applied for the following pelleting press types: ¡ 39 / 1000 ¡ 45 / 1000 ¡ 45 / 1250 ¡ 60 / 1250 Rim with bearing assembly Insertion of the clamping ring Fully assembled shell Our contribution to sustainability and cost reduction