Press O-500/390 for the Granulation of Pasty Products Granulation (pelleting) of raw materials, finished products, and waste can be achieved economically utilizing our ”horizontal flat die extrusion press“ compacting system. For processing of pasty products, the type O series = overhead drive has been developed. These presses are for example appropriate for catalysts, pigments, washing agent additives, clay, vulcanization accelerators, and instant vitamin C products. Press with overhead drive Directly after leaving the die, the pellets can be fed onto a conveying element – free from mechanical stress. Therefore clogging of the discharge devices as with standard presses and agglomerations of the pellets are avoided. The press is made of stainless steel and works on the well-proven flat die principle. Main machine bearings and roller bearings are provided with a long-term lubricant and with special seals.

Press O-500/390 Technical data Pellet diameter 0.6 - 15 mm 0.6 - 2 mm (only with perforated plates) 2 - 15 mm (only with dies) The press is driven by a three-phase current motor, a V-belt drive, and a slip-on gear. Hydraulic system of the pan grinder head The pan grinder head is equipped with a hydraulic pan grinder head adjustment. With this system, the distance between rollers and die can be modified during operation. Thus the thickness of the product layer can be influenced and adapted to the Die diameter Roller diameter Roller width Technical options ■ Roller drive for products with Drive...