*mydirectindustry

Catalogs
AMANDUS KAHL
KAHL Pan Grinder Mill - Wet Defibration of Biomass for Power Stations

KAHL Pan Grinder Mill - Wet Defibration of Biomass for Power Stations

Product catalog summary

Introduction
The document introduces a new method for wet defibration of biomass for co-firing in power stations using the KAHL Pan Grinder Mill. This process involves two steps to achieve a particle size of less than 2 mm, allowing carbon dust and defibered biomass to be efficiently blown into the combustion chamber.

Specifications
- The process is suitable for both wet and dry raw materials.
- It operates without the need for a hammer mill or pelleting.
- The capacity ranges from a few hundred kilograms up to 40 tons per hour per mill.
- The system operates silently, requiring no noise protection measures.
- It has low energy consumption and requires minimal space.
- The process does not require an aspiration system, cyclone, filter, or exhaust air plants.
- There are no ATEX problems associated with this process.

Procedure
The wood chips are ground between pan grinder rollers and a die, optimizing the crushing process without the need for drying or pelleting the fresh, defibered wood chips.

Relevance for Power Stations
This method is particularly relevant for power stations as it allows for the efficient co-firing of biomass, enhancing the sustainability and efficiency of power generation.

Contact Information
AMANDUS KAHL GmbH & Co. KG
Dieselstrasse 5-9, D-21465 Reinbek / Hamburg
Phone: +49 (0)40 727 71 - 0
Fax: +49 (0)40 727 71 - 100
Email: [email protected]
Website: www.akahl.de

Catalog excerpts

KAHL Pan Grinder Mill - Wet Defibration of Biomass for Power Stations-1

NEW: For Power Stations! Wet Defibration of Biomass for co-firing in power stations in 2 steps < 2 mm KAHL Pan Grinder Mill Carbon dust and defibered biomass are blown in one material flow into the combustion chamber. The fresh, defibered wood chips are neither dried nor pelleted. 40 t/h 1st step 2nd step

Open the catalog to page 1

KAHL Pan Grinder Mill - Wet Defibration of Biomass for Power Stations-2

AK68-E 10/09 AMANDUS KAHL GmbH & Co. KG Dieselstrasse 5-9 D-21465 Reinbek / Hamburg Phone: +49 (0)40 727 71 - 0 Fax: +49 (0)40 727 71 - 100 [email protected] www.akahl.de Optimum crushing of wood chips! ¡ This grinding process is appropriate for wet and dry raw material ¡ Without hammer mill ¡ Without pelleting ¡ Capacity range from a few hundred kg up to 40 t/h per mill ¡ No noise protection measures, silent operation ¡ Low energy consumption ¡ Low space requirement ¡ Without aspiration system, cyclone, filter and exhaust air plants ¡ No ATEX problems NEW: For Power Stations! Wet Defibration...

Open the catalog to page 2

All AMANDUS KAHL catalogs and technical brochures

Archived catalogs

Waste Tyre Recycling Plants
6 Pages