KAHL Batch Mixers Single-Shaft Mixer BWM, Twin-Shaft Mixer MAH Design criteria The contents of the batch mixer is indicated in litres of useful contents, e.g. 1,000 l contents in kg = useful contents x bulk density e.g. 1,000 l x 0.5 t/m3 = 500 kg Filling degree ■ Minimum 20 % ■ Maximum 110 % ■ The useful contents of a mixer is abt. 70 - 80 % of the gross contents. Field of application ■ Mixers of the construction series MAH and BWM are discontinuous mixers. ■ They are used as individual machines or as batch mixers within a plant. ■ Liquid addition is possible to a certain limit. Possible applications ■ Homogenizing of different raw materials ■ Storage of non-free-flowing products (prebin) The batch mixers of the construction series MAH and BWM can mix several solid matters (individual components) to a homogeneous mixture. Bulk density of the individual components: Compound feed: Individual components: Particle size of the components:100 μm - 4 mm ground

KAHL Batch Mixers Material: St 37-2, product-contacting parts in 1.4301 design possible Bearings: exterior pillow blocks Outlet: electropneumatically operated bottom flap over the complete mixer length Drive: slip-on geared motor Connections Inlet: 150 - 600 mm round Ventilation: ventilation socket depending on mixer size 100 - 400 mm Inspection openings: in the mixing drum and in the outlet case, protected by limit switches Compressed air: installed ready for connection, incl. maintenance unit Options: crusher, liquid nozzles AMANDUS KAHL GmbH & Co. KG Dieselstrasse 5-9 D-21465 Reinbek / Hamburg...