Catalogs >
AMANDUS KAHL >
KAHL AKANA Hammer Mills

KAHL AKANA Hammer Mills
2Pages

Catalog excerpts

AKANA Hammer Mills Crushing of Individual Products and Product Mixtures The AKANA hammer mills are appropriate for crushing individual products as well as product mixtures. With our mills, feed components, feed mixtures, all grain types, straw, wood, and similar soft to medium-hard products can be ground. Their special feature is the high throughput. Advantages: ■ Applicable for different products. ■ Easy to operate. ■ Due to the use of different screen perforations, beater designs, beater arrangements and speeds, the mills can be adapted to the customer requirements, for example on structure and fineness. ■ The hammer mills work according ■ The particle size is determined by to the principle of crushing by multiple impacts. ■ By means of the direct blow of the hammer mill beater on the product, the most efficient crushing is reached. ■ The circumferential speed of the beater point is about 100 m/s corresponding to abt. 360 km/h. the screen hole diameter and the mill speed. ■ The product only leaves the grinding chamber when it is smaller than the screen hole diameter. In case of standard products about 95 % are smaller than half the screen hole diameter.

Open the catalog to page 1

AKANA Hammer Mills Pre-grinding system (grinding of individual components): ■ Only few components in the formula ■ High percentage of individual components in the formula, e.g. 60 % of maize ■ In plants for conditioning of components ■ In roughage plants for voluminous products, e.g. straw, bagasse Fields of application In compound feed plants it is distinguished between grinding of individual components (pre-grinding) and grinding of component mixtures (post-grinding). Post-grinding system (grinding of component mixtures): ■ Many different grain components or components to be ground in the...

Open the catalog to page 2