|| KAHL Extruder OEE Flexible shaping for différent products

Due to the easy and rapid different products can be The KAHL extruder OEE with heating and/or cooling exact control of this ram. Machine power is regulated by extension of the hydraulic ram which can be quickly withdrawn in the event of overcurrent. The die change is carried out by means of hydraulic actuation thus is quick and efficient. The knife head is provided with a separate drive and remains in its position during the die change. At the start of the production, the KAHL extruder OEE does not require an increased water addition and can be started with an "open" die. It is less sensitive...

KAHL Extruder or for small-scale section corresponds gap expander, cooled or heated product outlet can be installed, hydraulically movable. can be varied 450 rpm. This input of specific possible, so that can be exerted parameters such modification, or Extruder OEE 23.3 2 - 4 t/h 132 - 315 kW Extruder OEE 30.2 5 - 8 t/h 250 - 315 kW *These extruders are also available in the Kahl pilot plant Plant properties and options: ¡ Exact proportioning of solid matter, steam, and liquids ¡ Optimum product conditioning ¡ Coating system ¡ Careful drying ¡ Energy recovery and odour reduction

Extruder OEE standard equipment with heating and cooling jacket Extruder OEE 8 for laboratory use and for small-scale productions Extruder MPS with mixing and pressure build-up system Extruder OEE with variable pressure build- pile-up weir, degasification, and micro-component Extruder OEE with variable pressure build-up system, pile-up weir, and degasification ¡ A proven technology is available to our and prospective buyers for tests with their ¡ Product tests ensure a reliable production The KAHL pilot plant Ventilation Inlet Steam Water Fat Steam Steam Water Fat Water Fat Steam Steam Molasses...