KAHL Weighers Continuous cellular wheel weighers type WZ with electronic weighing system Continuous cellular wheel weigher type WZ with capacity ranges from 10 to 100 t/h Continuous cellular wheel weighers are used for continuous registration/ measurement of bulk product flows of mealy, powdery, fibrous, and structurized products. Measurement is effected with an accuracy of ± 2 %. The output signal serves as reference signal for control loops, with which the proportioning of further product flows, such as liquids and steam, is controlled. The capacity ranges from 10 to 100 t/h depending on the type series. Design Product proportioning onto the cellular wheel is effected by means of almost pulsation-free proportioning screws. Variable-speed drives and a screw configuration adapted to the product properties serve for uniform feeding of the products. The continuous cellular wheel weigher consists of a weighing frame with removable hood and inspection flaps. A cellular wheel made of a special material serves as weighing unit. The continuous weighers are adapted to the bulk product flows by their constant speed and the defined cell volume.

KAHL Continuous cellular wheel weighers Continuous cellular wheel weighers type WZ with electronic weighing system As protection against pollution and thus falsification of the measuring signal the cells are cleaned at regular intervals and in an adjustable pulse train with compressed air. Technical data Three different types are available: WZ III, IV, and V with capacities of 10, 16, 25, 40, 63, 100 t/h 20 – 300 m3/h Proportioning units: Simplex AMANDUS KAHL GmbH & Co. KG Dieselstrasse 5-9 D-21465 Reinbek / Hamburg Phone: +49 (0)40 727 71 - 0 Fax: +49 (0)40 727 71 - 100 [email protected]...