Accessories • Safety • Torches and electrodes • Stand and tooling • Gas handling • Cables TYPICAL APPLICATIONS

SAFETY TIG welding generates an intense arc of light - some of which is in the ultraviolet spectrum - and proper safety is important to protect eyes and skin from damage. In addition, parts and tooling may be hot after welding and must be handled carefully. Welding helmet with auto-darkening (shade 13) glass. To protect eyes and skin, Amada Miyachi America recommends wearing both a welding helmet and gloves. Part Number Welding helmet Welding gloves 090-024 (Medium) 090-025 (Large) 090-026 (X-Large) TORCHES AND ELECTRODES In addition to a power supply like the MAWA-300A, TIG welding requires...

STAND AND TOOLING Precision welding, requires a sturdy stand and excellent positioning. Amada Miyachi America's stand mounts the torch on a manual (or optionally motorized) z-axis. The base features t-slots for easy part positioning. Add an X-Y stage for precision parts positioning relative to the electrode. The stages have a full travel range of 1" x 1". Item Part Number Adapter Plate *Note: Touch start requires motorized stand. GAS HANDLING Arc welding must be generated in an inert environment. Typical gases used are argon and helium. Amada Miyachi America recommends the following tubing and...

Cables and components required for operating MAWA-300A. Part Number Grounding cable (3 meters) Cover Gas Starter Kit • Pressure Regulator 720-315 • 5/16” tube to ¼” pipe Connector • Gas tube (5/16”) • Welding helmet (900-383) • Welding gloves (090-025) Torch Starter Kit • Torch stand • 37 Pin D-SUB connector (included with unit) Torch and Electrode Kit (10-601-01) • Electrode - 3/32" (010-020) • 3/8” gas nozzle (701-070) • Three phase 208 VAC Input Connector *Tooling • Optional XY stage, manual adjust (524-043) • Ground cable • Power Cable (4-37238-01) MAWA-300A Power supply • Ground cable •...