IPB-5000A-MU DC Inverter Welding Power Supply • Four control modes for process optimization for part manufacturing tolerances • GOOD / NO GOOD determination signals if weld was successful providing instant feedback • Displacement measurement indicates the amount of collapse the material exhibits during the weld. • Envelope feature - allows users to set dynamic profile of limits around a setting. Key features TYPICAL APPLICATIONS • Control Modes - Optimum control modes for obtaining ideal weld quality and consistency can be chosen from; constant current control, constant voltage control, combination of constant current and constant voltage control, and constant power control. • GOOD/NO GOOD determination - The comparator feature allows to set upper and lower limits around the measured value of up to four parameters; which are current, voltage, power and resistance. When those values reach out of the limits, an error signal or a caution signal alarms. Automotive sensor • Diplacement Measurement - Measures how much an electrode moves down because of material collapse during weld. Weld to displacement (option) - stops welding when displacement value reaches the set value. • Envelope - The envelope feature allows dynamic limits to be set around a monitored waveform to ensure the same resistance change occurs at the same rate for every weld. Electrical bussbar Red: envelope Yellow: current Motor armature

TECHNICAL SPECIFICATIONS * Max secondary current dependent on secondary Impedance. WEIGHT & DIMENSIONS 1820 S. Myrtle Ave. • Monrovia, CA 91016 US T: (626) 303-5676 [email protected] • www.amadaweldtech.com ISO 9001 Certified Company • 24/7 Repair Service: 1-866-751-7378 Qmada AMADA WELD TECH INC. AMERICAS AMADA WELD TECH (Midwest Technical Center) Detroit, Michigan T: (248) 313-3078 [email protected] AMADA WELD TECH (Mexico Office) El Paso, Texas T: (915) 881-8765 [email protected] AMADA WELD TECH DO LTDA. Sao Paulo, Brasil T: +55-11-4193-3607 [email protected]...