Accessries
9Pages

Catalog excerpts

• Includes 1 Pair ET0402 Electrodes Model PHP Probe Handpiece • Includes 1 Pair EP0402 Electrodes for handpiece and 1 pair EP0802 for probe Model GHP Gun Handpiece • Includes 1 Pair EP0802 Electrodes, straight extension and 30° elbow adapter Accessories A successful resistance spot welding process generally requires a welding power supply, a spot welding head, and a weld monitor or weld checker. Selecting the right accessories for these critical components can enhance and improve your results, and provide additional safety for your operators. HANDPIECES Generally speaking, welding handpieces should be used only when it is impractical to use a welding head. Their relative ease of use, combined with low maintenance and flexibility, make them well-suited for small batch production and R&D environments. • Both the Model THP tweezer, and PHP probe handpiece are used to weld small parts which require less than 125 watt-seconds or 1/2 cycle AC, and welding forces less than 7 pounds. The Model HFP high force probe is used for applications which require higher energy and/or force than either THP or PHP. All three models are force fired to ensure repeatability. • The Model GHP and HDHP are switch fired handpieces and can be used to weld or tack materials that don't require stringent force control. Handpieces are available with either 4 ft or 10 ft long cables. As a general rule, the energy delivered to the workpiece with 10 ft #6 cables will be approximately 15% of that delivered with 4 ft #6 cables. Handpieces are furnished with cables, as indicated in the following table, and one pair of RWMA electrodes. RESISTANCE WELDING Rating ' Includes 1 EP0902 Straight Electrode, 35 or 90 degree electrodes available 4-30149-02, 10 ft #2 gauge grounding cable sold separately Model VBTWK/115, Ball Tacking Kit Accessories are an important part of any welding system. For your convenience Amada Miyachi America provides: Index Page For assistance In selecting accessories or for accessories not Included in this data sheet, contact your local Amada Miyachi America sales representative or telephone our customer service department at (626) 303-5676.

Open the catalog to page 1

RESISTANCE WELDING OPTIC ACCESSORIES The Model SMZ-660 Stereo Zoom Optic Pod (1) is supplied with 10X Eyepieces and a 0.5X Objective Lens. It provides magnification which is adjustable from 4.0-25X and a working distance of 211 mm. Its lightweight housing is airtight, anti-mold and anti-electrostatic. It includes the C-Bonder Arm and is compatible with any Model 50 or 80 Series welding head. The Model OMA optic mounting assembly (2) provides the posts and hardware required to support the optic pod. The Model BPTL, Thin-Line base plate (3) is drilled to accept all 80 Series Thin-Line weld...

Open the catalog to page 2

FUME EXTRACTION Spot welding, fusing and brazing are all processes that can eject material of various sizes from the part. Fume extractors are necessary to remove harmful airborne particles so that operators and engineers are not exposed. These sometimes toxic fumes need to be collected and properly filtered. Use the following table to identify the best fume extractor for a given process: WATER CHILLERS Water chillers are necessary for cooling higher powered welders. They control the temperature of the water to keep condensation from building when facility water cannot. The following...

Open the catalog to page 3

RESISTANCE WELDING FOOTSWITCHES FOR AIR ACTUATED HEADS The Model FS2L two-level footswitch is intended for use with all Amada Miyachi power supplies. The first level actuates the weld head via the air valve driver of the power supply; the second level, along with the force firing switch in the weld head, initiates the welding current. The Model FS1L one-level footswitch also may be used with all Amada Miyachi power supplies. The single level switch actuates the weld head and initiates the welding current simultaneously (when the firing switch closes). MODEL FS Single level Firing Switch...

Open the catalog to page 4

ELECTRODES Highly conductive workpiece materials generally require electrodes of high resistance. Similarly, hard materials require softer, copper-based electrodes. When welding dissimilar materials such as copper and nickel, the normal choice would be a molybdenum electrode against the copper and a GLIDCOP electrode against the nickel. If stored energy or half-cycle equipment is used to weld dissimilar materials, place the more resistive material against the negative electrode. Likewise, if similar materials with thickness ratios greater than 4:1 are welded, place the thinner material...

Open the catalog to page 5

ESG0402 - 1/8 in dia. STRAIN GAUGE ELECTRODES Used with THP ESG0400 Series Electrodes For Strain Gauges 6-32 NC2 Thread ES0800B - 1/4 in dia. BRAZED INSERT ELECTRODES Used with 82, 83, 84 and 180 Series weld heads ET0400 - 1/8 in dia. TWEEZER ELECTRODES Used with THP AND PHP

Open the catalog to page 6

UNIBOND® ELECTRODES Unibond electrodes are used for parallel gap bonding and reflow soldering. Generally, RWMA2 copper Unibond electrodes are used with resistive and/or hard materials such as gold plated kovar and nickel. Molybdenum Unibond electrodes are used for bonding conductive or soft materials such as copper or gold. The face of a Unibond electrode is 0.020 in (0.5 mm) wide by 0.030 in (0.75 mm) deep. In unfixtured applications, this limits their use to bonding ribbons (wire) which are at least 0.010 in (0.25 mm) wide because of the limited visibility. RESISTANCE WELDING Unitips are...

Open the catalog to page 7

CABLES, TERMINALS, CONNECTORS AND ADAPTERS Common size weld cables, sold in pairs #2 AWG Cables Special size cables can be purchased on request A 4-35670-01, Voltage cable, 6 ft long with #2 stud size ring terminals 4-35670-02, Voltage cable, 6 ft long with #6 stud size ring terminals 4-35670-03, Voltage cable, 6 ft long with #8 stud size ring terminals B 10-381-01, Firing switch Extension Cable, 6 ft long 18-045-01, Transformer Sense Cable, 15 ft long Mates with IS and ISA series welders and IT-XXXX-X transformers *Not for use with IS-300A AA-8801, GS-1830 Extension Cable, 15 meters,used...

Open the catalog to page 8