LC F1 NT
8Pages

LASER CUTTING 3 AXES LINEAR DRIVE LASER CUTTING MACHINE

3 AXES LINEAR DRIVE LASER CUTTING MACHINE RELIABLE, HIGH QUALITY LASER PROCESSING WITH AN APPLICATION-ORIENTED APPROACH HIGH SPEED LINEAR DRIVES PROVIDE HIGH ACCURACY, FULL RANGE CUTTING CAPABILITIES The LC F1 NT series laser cutting machines introduced technology that is still uncommon in the industry. All 3 axis are linear driven, providing high speed, acceleration and productivity. The LC F1 NT covers the full range of processing requirements and has the added benefits of features to eliminate secondary processes, such as AMADA's original WACS (Water Assisted Cutting System) and cut...

TYPICAL PROCESSING SAMPLES PRODUCTIVITY COMPARISON 42.8% TIME REDUCTION (4 kW) Conventional 4 kW C02 laser machine 0 RUNNING COST COMPARISON 44.1% COST REDUCTION PER PART (4 kW) Conventional 4 kW C02 laser machine Material: Aluminium, 1.0 mm Dimension: 290.01 x 182.08 mm PRODUCTIVITY COMPARISON PRODUCTIVITY COMPARISON Conventional 4 kW CO2 laser machine Conventional 4 kW CO2 laser machine 0 RUNNING COST COMPARISON RUNNING COST COMPARISON 35.6% COST REDUCTION PER PART 16.6% COST REDUCTION PER PART Conventional 4 kW CO2 laser machine Conventional 4 kW CO2 laser machine 0 Running costs include...

HIGH SPEED, HIGH ACCURACY PROCESSING REDUCED PRODUCTION TIMES DUE TO INCREASED ACCELERATION Linear drive Sample workpiece 5 X 5 mn/thickness 1,3mm Cutting speed Rack & pinion \ball screw Cutting speed Cutting speed comparison: cycle time and acceleration Peripheral processing Process time Peripheral processing Process time Time saving Cycle time = time required by the laser cutting machine to complete each series of processing steps when it runs continiously and repeatedly With 2.5g acceleration, high point-to-point positioning speeds and high cutting rates can be achieved due to the latest...

HIGH QUALITY, SHARP-EDGE PROCESSING PREVENTION OF CORNER AND EDGE MELTING Power response of conventional machine: 8 msec Power response of LC F1 NT: 0.125msec Target value (proportional to speed) Laser power Laser power Target value (proportional to speed) Laser power command value Laser power command value Time 64 times faster power response High quality cutting surface The melting of corners and edges is prevented by the high speed NC control and dramatically improved power response of the oscillator. The laser power can be finely tuned due to the 0.125 msec oscillator response. TWIN...

FUNCTIONS AND OPTIONAL EQUIPMENT Monitoring eyes Optical fiber Scattered radiation Lens Process Monitoring System Factors that may cause processing defects, such as through piercing, gouging and plasma, are constantly monitored. The process monitoring function ensures continuous and stable processing. Before piercing medium thickness sheets, oil is sprayed on the material to prevent spatter build-up, improve processing quality and achieve stable processing. While cutting thick material, water is sprayed on the material to reduce the thermal effect of cutting, prevent cutting defects, and...

‘One Touch' Lens and Nozzle Exchange The OVS IV system measures the pitch of two reference holes and automatically compensates for any origin deviation when transferring a sheet of parts from the punch machine. The pitch and circularity of the cut holes are also measured. When the measured values fall outside the specified limits, an alarm is activated. This fully automatic CAM system nests all the user defined parts and quantities, applies punch tooling/laser profiles, defines the processing sequence and generates the NC program. Increase productivity for your punch, laser or combination...

DIMENSIONS LC-3015 F1 NT+ shuttle table (LST) (L) 9845 x (W) 2910 x (H) 2010 LC-4020 F1 NT+ shuttle table (LST) (L) 11580 x (W) 3410 x (H) 2010 SHUTTLE TABLE SPECIFICATIONS LC-3015 F1 NT Specifications, appearance and equipment are subject to change without notice by reason of improvement. For your safe use Be sure to read the user manual carefully before use. When using this product, appropriate personal protection equipment must be used. A Laser class 1 when operated in accordance with CE Regulations. The official model name of the machines and units described in this catalogue are...