HG Rm
8Pages

AUTOMATED BENDING SYSTEM FOR LARGE SCALE PARTS

AUTOMATED BENDING SYSTEM FOR LARGE SCALE PARTS BENDING ROBOT SYSTEM FOR BENDING COMPLEX RIB AND PANEL SHAPES EASY OPERATION , SECURE AND ACCURATE AUTOMATIC PRODUCTION OF COMPLEX RIB AND LARGE SIZE PARTS The HG-Rm uses the high end HG1303 press brake, the best bending performance with a new hybrid drive system : The press brake is integrated with a single 7-axis articulated robot and a series of intellingent devices aimed specifically at bending complex rib and large panel parts. Photograph may include optional equipment

TYPICAL PROCESSING SAMPLES Slide gripper Material:Galvanised steel 3.2 mm Dimensions: 683.0 x 1203.0 mm Total number of bends: 16 Combination gripper Material: Galvanised steel 3.2 mm Dimensions: 283.0 x 2400.0 mm Total number of bends: 5 These two grippers are dedicated to rib part and they allow processing of complex shapes with shorter cycle times.

COMPLEX RIB PARTS AND LARGE SCALE PANELS CAN BE AUT ACCURACY AND SPEED REDUCTION OF SETUP OPERATION BY AGC AND AUTOMATIC REGRIPPING DEVICE SIMPLE OPERATION WITH A SINGLE ROBOT (7-AXIS ARTICULATED ROBOT) A 7-axis articulated robot (six axes of motion plus one travel axis) can perform the whole bending cycle : loading, bending, repositioning when necessary and unloading. Part loading Part positioning & bending Part squaring Part repositioning Part unloading REGRIPPING DEVICE FOR PANEL The automatic regripping for large panels is equipped with 2 motorized arms and automatic scissor supports....

TOMATICALLY FOLDED WITH HIGH REDUCED TRIAL BENDING AND RELIABLE PRODUCTION 2 axis BI-S angle sensor (option) guarantees high accuracy for the entire length of the part. REGRIPPING DEVICE FOR RIB PARTS An automatic regripping device dedicated to rib parts ensures high productivity even for complex shapes. The regripping system for ribbed parts consists of an automated arm and clamp for minimal downtime. The regripping device can also be used as a sheet support when regripping at the material pinch point. REDUCED SETUP TIME AND EXPANSION OF THE BENDING RANGE The gripper is automatically...

EASY OPERATION AMNC 3i The AMNC 3i control is optimised for ease of use. - The multi-touch LCD panel, with its user-friendly design, provides intuitive and smart operation. - The 18.5 inch vertical display is the unique control panel where operator can manage the entire process. DEDICATED CAM PROGRAMMING FLOW A 3D part is selected from the database then all the process steps (tool setup and bending sequence ,robot grip position , UL strategy) are defined; all robot movements are automatically generated avoiding manual teaching operations. AR-Cam generates the press brake and robot programs...

L-axis shift (delta X) Tool cleaner A-grip A & hydraulic die holder - Automatically cleans the dies and die holders. - Independent X axis system allows effective gauging even for variable part shapes. - Maximum L-axis shift stroke: ±150 mm Easy and fast setting of complicated tool layouts with automatic tool clamping. A-grip A: • Front installation /removal of punches • Tool dropout prevention mechanism • Secure tool clamping Dedicated enclosure for safety and visibility Safety enclosure Amada proposes digital manufacturing using vPSS (Virtual Prototype Simulation System). All data is...

HG 1303 RM Dimension for standard configuration with 8m track stroke (L) 14400 x (W) 7200 x (H) 3290 Maximum height reachable by robot: 4000 mm (including part) Dimensions for all other configurations are different. Please contact us for details Specifications, appearance and equipment are subject to vary without notice by reason of improvement or regional requirement. For Your Safe Use Be sure to read the operator's manual carefully before use. When using this product, appropriate personal protection equipment must be used. The official model names of machines described in this catalogue...