AE-NT
8Pages

SINGLE AC SERVO-DRIVE TURRET PUNCH PRESSES

SINGLE AC SERVO-DRIVE TURRET PUNCH PRESSES COMPACT, ECO-FRIENDLY AND INTELLIGENT NEW TURRET PUNCH PRESS Amada have installed over 30,000 turret punch presses across the world. The AE-NT series builds on our knowledge and experience, combining Amada's original, highly rigid 'bridge frame' construction, a single AC servo motor punch action, small footprint and large capacity turret. These factors ensure stable, high speed, high quality processing of the most demanding production. Many process integration functions and an environmentally driven design provide a very cost efficient performance....

TYPICAL PROCESSING SAMPLES Material: SECC 1.0 mm Dimension: 905 x 905 mm PROCESSING TIME COMPARISON PROCESSING TIME COMPARISON Conventional punch machine Conventional punch machine 0 Material: SECC 1.6 mm Dimension: 274 x 94.6 mm PROCESSING TIME COMPARISON Material: SECC 1.0 mm Dimension: 333.4 x 392.3 mm PROCESSING TIME COMPARISON Conventional punch machine Conventional punch machine 0

ACHIEVEMENT OF STABLE, HIGH SPEED PROCESSING POWER VACUUM SYSTEM Air blow tool + power vacuum system Stable, high speed processing achieved by reduced slug-pull The Power Vacuum system creates an area of lower pressure below the small station dies to 'suck' the slug away from the processing area. This also allows for a smaller punch penetration into the die (typically 1mm), resulting in higher speed processing. The optional Slug Suction Unit can be specified to produce the same effect for the larger station sizes. The air blow tool injects air and oil mist into the die during punching to...

ACHIEVEMENT OF HIGH QUALITY PROCESSING HIGH SPEED DEBURRING Workpiece Time saving, in-cycle operation After the slitting operation, the underside of the work piece is chamfered using a specic die to eliminate time consuming secondary processes and extra handling. Deburring tools can be manufactured to match the width of your slitting tool. Deburring die Secondary operation not required The removal of overlap marks, eliminating any remedial work Edge surface when using the slotting tool The slotting tool can produce overlap mark-free edges at any angle when installed in a 2" auto-index...

FUNCTIONS AND OPTIONAL EQUIPMENT Power saving/optimum stroke Power requirement while punching (kW) 20T mechanical punch machine 20T hydraulic punch machine Drive mechanism The AE-NT series uses a single AC servo motor system capable of achieving a hit rate of 900 hits/min. The press drive mechanism, which is housed within the bridge frame, uses a highly durable ball screw and link combination that ensures stable, high speed processing with high productivity. The AE-NT series consumes as little as 3kW of power while punching and has extremely low standby power requirements. Other...

High rigidity Large capacity turret At 40mm thick, the patented bridge frame of the AE-NT series is one of the most robust available. The high rigidity provided by this allows for high speed, high accuracy, stable processing for the entire life of the machine. Amada's high capacity, thick turret conguration allows 51 tools to be loaded quickly and easily. The 120mm thick upper turret securely guides the tools during operation to provide high accuracy processing. Tool balancer The tool balancer is used to load/unload large size tools in the turret. It facilitates and accelerates the setup of...

Without safety equipments MACHINE SPECIFICATIONS AE NT Series Numerical control Punching force Drive system Single AC servo drive 51 ( 4 Auto Index stations) Controlled axes Axis travel distance Maximum simultaneous feed rate Maximum hit rate (punching/marking) Positionning accuracy Maximum sheet thickness for: - Standard brush table - High speed floating brush table (option) - High density brush table (option) Work range without reposition Maximum material mass Work chute (option) size Machine mass Specifications, appearance and equipment are subject to change without notice by reason of...