ACIES Series
8Pages

INTEGRATED BLANKING PROCESS SOLUTION

INTEGRATED BLANKING PROCESS SOLUTION 40 YEARS OF PUNCH PRESS INNOVATION PERFECT FOR ALL PRODUCTION REQUIREMENTS AND CONTINUOUS OPERATION AMADA has developed the ACIES, the integrated blanking process solution. The ACIES is a fully automatic punch and laser combination machine that can run automatically and continuously by quickly creating processing data for very small lots or new products and greatly reducing setup time. Building on our experience of the last 40 years of punch press innovation, the ACIES is equipped with the next generation, fully covered ZR turret* to enable high speed,...

TYPICAL PROCESSING SAMPLES PROCESSING TIME Material: Electrogalvanised steel, 1.0 mm Dimension: 300.0 x 300.0 mm Comprised of three parts Material: Electrogalvanised steel, 1.0 mm Dimension: 100.0 × 100.0 mm Material: Electrogalvanised steel, 1.0 mm Dimension: 200.0 × 260.0 mm PROCESSING TIME PROCESSING TIME

HIGH QUALITY, HIGH SPEED PROCESSING HIGH SPEED PROCESSING OF FORMED PARTS WITHOUT SCRATCHING THE UNDERSIDE Completely flat table Only the required die lifts through the table New slug suction unit High speed processing with a scratch free underside Highly efficient slug pull prevention system for all stations AMADA's continuous development of the turret punch press has led to the elimination of marking of the underside of the material by the die. The lower turret of the ACIES is completely covered by the brush table. Up/down forming, high extruded forms and scratch free processing are all...

CONTINUOUS PROCESSING SETUP OF TOOLS DURING PROCESSING AND MAXIMIZED MACHINE UPTIME Stable high quality processing. Prevention of tool setup mistakes with ID tools Automatic change of tapping tools, from M2.5 to M8 (seven sizes) Tools are managed digitally according to their individual ID. The ACIES not only reduces tool setup mistakes and tool maintenance time, but also automatically adjusts the die height to take regrinding into account. Four types of tapping tools can be automatically changed to increase the number of parts that can be tapped on the ACIES. When a tapping tool reaches the...

FUNCTIONS AND OPTIONAL EQUIPMENT Gas Start command Pressure command Warning and alarm signals NC auto focus control system The optimum focal point is stored in a database and automatically set to suit any material. This assures the optimum laser beam quality and saves assist gas cost. High pressure NC assist gas control system Non-contact Z-axis sensor The assist gas selection and pressure is automatically controlled by the NC to suit specific materials. The system is adapted to the processing of various material types and thicknesses. The sensor is constructed to reduce the effect of...

Manual Clamp (three-clamp standard specification) Clamp positioner (two-clamp specification) The ACIES is equipped as standard with 3 manual clamps capable of processing materials up to 6 mm thick. Automatically positions the workclamps as programmed. Material thickness should be 3.2 mm or less. Stationary fixed clamps + clamp positioner (four-clamp specification) Clamps 1 and 2: L clamps (manual) (Maximum setting value: 530 mm) Clamps 3 and 4: Clamp positioner AUTOMATION AMADA offers a wide range of modular automation covering all customer needs. AMNC 3i Single pallet load/unload with part...

MACHINE DIMENSIONS* ACIES-2515T (L) 7975 x (W) 5970 x (H) 2666 ACIES-2515B (L) 6942 x (W) 5970 x (H) 2524 (*) without safety equipments * Maximum possible combined axis speed Specifications, appearance and equipment are subject to change without notice by reason of improvement. Scratch free operation dependant on environmental and machine conditions. For your safe use Be sure to read the user manual carefully before use. When using this product, appropriate personal protection equipment must be used. Laser class 1 when operated in accordance with CE Regulations. The official model name of...