GMRACK
GMRACK
- Supports 2 to 6 gas channels.
- Inlet gas pressure ranges from 3 bars nominal to a maximum of 8 bars.
- Outlet pressure is atmospheric, with higher options available upon request.
- Compatible with pure gases, concentrated gas mixtures, and most aggressive/reactive gases.
- Mixing capability of up to 4 channels simultaneously with a dilution ratio up to 1:10000.
- Flow accuracy is ±1% of the setpoint, with repeatability less than 0.1%.
- Response time to setpoint is less than 5 seconds.
- Equipped with a 5” touch screen panel and embedded GasMix™ software.
- Remote control via Ethernet and USB port for project uploads/downloads.
- Optional features include automatic flow regulation, heated tubing, and customized communication options.
- Reduces operator time and increases productivity and safety.
- Optimizes gas cylinder use and reduces stock requirements.
- Provides accurate, automated, and traceable quality procedures.
- Operation temperature: 10-50°C.
- Power supply: 90-260Vac, 1.5-4A, 50-60Hz.
- Dimensions: 48.3x34.5x18 cm (19”x13.6”x7”).
- Weight: approximately 9 kg (20 lbs), depending on configuration.
Catalog excerpts
• Enhanced automation features • On-board computer and a touch screen for easier control on site • USB port on front panel to upload projects or remotely driven by a PC • Optionally can be delivered without a touch screen (G-Rack model) remotely driven by GasMix software only via Ethernet communication GasMix™ in a 19'' rack with extra functionalitiesThe GMRack is the industrial version of the most popular laboratory Aiolos II gas mixer/ diluter from AlyTech. Fitted into a standard 19" rack mount , this system accommodates up to 6 gas channels, and makes calibration gas mixtures directly at the production site or within the analyzer tower. For easier use directly on site, the GMRack is equipped with on-board computer and a touch screen . Embedded GasMix™ software controls the mixer operation. It may drive an external injection valve and/or the Start command of an analyzer. The operator can do a single injection or run fully automated preprogrammed sequences for a linearity check, a multipoint calibration, or generation on-demand gas mixture. The strong benefit of the GasMix™ is the drastic reduction of operator time. • Optimization of the cost and efficiency of gas cylinders use • Saving money by reducing the stock of necessary gas cylinders • Offering accurate, automated and traceable quality procedures • Reducing of operator bench time • Increasing productivity, safety and application flexibil
Open the catalog to page 1
Intelligent gas mixer / diluter with a remote or on-site control Smart software User-friendly and intuitive, the GasMix™1software helps to build fully automated, multi-step pre-programmed sequences for mixing/diluting. Routine procedures created by the user may be saved and recalled at any time. The system can be remotely controlled via Ethernet communication from a remote desktop computer with GasMix™ Software (PC software delivered in standard). Alternatively, library of standard, sequences and system configuration profiles can be pre-programmed on an external PC and transferred to the GMRack...
Open the catalog to page 2
