AURA II
AURA II
- Compact and easy-to-use device with low operating pressure for maximum safety.
- Equipped with heating, pressure, and flow regulators to fit optimal conditions for various applications.
- Inert-treated tubing for trace analysis and guaranteed vapor phase injection.
- Regulated vaporizer temperature from 40°C to 160°C.
- Output pressure regulated between 1 to 3 bar abs and flow from 20 to 200 cc/min.
- Includes a 0.5µ stainless steel filter and inlet gas pressure security via a relief valve.
- Multiple operation indicators and a 24V DC power supply.
- Oil & Gas: Liquefied gas sampling for GC, microGC, GC/MS, and calibration of elemental analyzers.
- Research: Analysis of LPG or liquefied gas and preparation of gaseous samples.
- Inlet Pressure: Max 50 bar (725 psi), Min 2 bar (30 psi).
- Vaporizer Temperature: Max 160°C (320°F), with a warm-up time of approximately 15 minutes.
- Heat Power: 100W, with internal gas lines heated at 120°C (248°F).
- Output Gas Line: Insulated transfer line of 1 meter, heated at 120°C (248°F).
- Electrical Specification: 110-230VAC, 2.4A, 50-60Hz.
- Dimensions: 22x27x31 cm (8.6” x 10.6” x 12.2”), Weight: 8 kg (18 lbs).
- Increases productivity and safety while improving quality assurance.
- Automates gaseous and LPG sample injection and performs multipoint calibration from a single standard.
- AIOLOS II: An intelligent gas mixer, diluter, and injector for customized gas mixtures.
- LIQMIX: An automated and cost-effective way to generate standard gas from a liquid or liquid mixture down to ppb levels.
Catalog excerpts
LPG VAPORIZER Compact device, simple and ease to use Low operating pressure, maximum operator safety All tubing are inert treated for trace analysis Regulated vaporizer from 40°C to 160°C Guaranteed vapor phase injection Pressure or flow operation mode Regulated output pressure 1 to 3 bar abs Regulated output flow from 20 to 200 cc/min Equipped with 0,5p stainless steel filter Inlet gas pressure security by relief valve Multiple operation indicators Simple, safe & cost-savingLooking for a reliable sampling of LPG or liquefied gas? AlyTech AURA II provides the best service. Designed for laboratory use as standalone vaporizer for safe and repeatable vaporization of liquefied petroleum gas (LPG) or other liquefied gas for sampling to GC, microGC, GC/MS or elemental analyzer. A combination of AURA II with GasMix™ Aiolos dilutor/ injector is often used by petroleum laboratories for total sulfur analysis in compliance with ASTM D6667 or D7551. Saving operator time and money, this solution enables the automation of gaseous and LPG samples injection, as well as performing a multipoint calibration from a single standard. The new AlyTech vaporizer significantly increases productivity, safety and improves your quality assurance while running LPG or other liquefied gas samples. Equipped with heating, pressure, and flow regulators it is flexible to fit optimal conditions for your application. - Liquified gas sampling to GC, microGC, GC/MS - Analyses of LPG or liquified gas - Calibration of elemental analyzers - Gaseous samples preparation - LPG sampling for detailed hydrocarbon analysis
Open the catalog to page 1
AURA II : Convenient and versatile The AURA II is capable of handling inlet pressures up to 50 bar (725 Psi) assuring gas output up to 3 bar (43 psi). After liquid sample gasification, all gas lines are heated to prevent condensation. Flexible 1-meter heated transfer line is delivered in standard. There are switching valves, gages and regulators to set output by desired pressure or by flow whatever is more suitable for the analyzer. An automated and cost effective way to generate a standard gas from a liquid or liquid mixture down to ppb levels. • Inlet Pressure max: 50 bar (725 psi), protected...
Open the catalog to page 2
