Heat Sink Systems
14Pages

Heat Sink Systems Casings Insulation + Heat Conduction Index For a range of it’s heat sinks designed for forced convection, Alutronic offers pre-assembled, standardised cooling aggregates. These standards offer a proven thermal solution for your electronic power device such as IGBTs or similar. You can choose from several combinations of heat sinks, each at different lengths, with different options of high quality axial fans. Also you can add a pressure chamber to the cooling aggregates. The pressure chamber leads to a more even air flow throughout the length of the heat sink, thereby increasing its efficiency. As always at Alutronic, feel free to contact us directly if you need any customisation done to our standard offer, or if you have any questions. We are constantly expanding our range of products, and you can also get the latest information by visiting our website at www.alutronic.de Heat Sink PCB Mounting Standard Extrusions Customised Extrusions HEAT SINK SYSTEMS Detailed information on our products and solutions, please visit: www.alutronic.com

ndex Mounting ^Conducti or^ Casings Heat Sink Sys- Powerblocs Heat Sink PCB Standard Customised Alutronic in Short tems Mounting Extrusions Extrusions Pin Heat Sink Systems ALUTRONIC heat sink and SEPA Fan From the fusion of ALUTRONIC heat sinks and SEPA fans the HXB models have been created. A combination, with which the fan distributes air through the heat sink for optimal cooling. The coolers of the latest generation achieve a high flow rate with very low values of power consumption. As a result of the computer-supported development of the wing geometry, even the noise development has...

ALUTRONIC SOLUTIONS FOR COOL RESULTS ARTICLE NAME Detailed information on our products and solutions, please visit: www.alutronic.com

ALUTRONIC SOLUTIONS FOR COOL RESULTS ndex Mounting ^Conducti or^ Casings Heat Sink Sys- Powerblocs Heat Sink PCB Standard Customised Alutronic in Short tems Mounting Extrusions Extrusions ARTICLE NAME

ALUTRONIC SOLUTIONS FOR COOL RESULT5 Fan units with axial blowers, also suitable for double-sided mounting of devices - Optimisation by special lamella construction - There are two assembly surfaces available for assembly of the semiconductor modules to be cooled, if necessary. - The technical specifications are related to the fitting of a plane-milled assembly surface with uniform load distribution - The pressure chamber between the fan and lamella unit ensures optimal air distribution on all blades. - The safety regulations on technical equipment according to law must be observed and...

ALUTRONIC SOLUTIONS FOR COOL RESULT5 ndex Mounting ^Conducti or^ Casings Heat Sink Sys- Powerblocs Heat Sink PCB Standard Customised Alutronic in Short tems Mounting Extrusions Extrusions LK 30/200/A Max. power loss: [W]: 400 LK 40/200/Q Max. power loss: [W]: 625 Min. thermal resistance: [K/W]: 0.073 132

ALUTRONIC SOLUTIONS FOR COOL RESULT5 The cooling aggregates of the PK series are designed for high capacity of heat dissipation. The pre-milled mounting surface (Rz max 10^m) is ready for assembly. Customised shapes are also possible upon request. Detailed fan specifications you will find on www.alutronic.com. PK715 including fan and pressure chamber > in Detailed information on our products and solutions, please visit: www.alutronic.com

ALUTRONIC SOLUTIONS FOR COOL RESULTS ndex Mounting ^Conducti or^ Casings Heat Sink Sys- Powerblocs Heat Sink PCB Standard Customised Alutronic in Short tems Mounting Extrusions Extrusions PK716 including fan | PK 716-100-AL-24V PP~K 7T6-~100~-Al-230V~ PP~K 7T6-200-AL-24V""' ! PK7T6"-20O-AL-2"3ov' iPK7T6-300-AL-24v“ PP~K 7i6-300"-AL-23"qV' PK716 including fan and pressure chamber article

ALUTRONIC SOLUTIONS FOR COOL RESULTS PK717 including fan Alutronic extrusion PR717 with pre-milled mounting surface, inserted sheet to channel airflow and pre-mounted fan (24V DC or 230V AC) Insulation + Heat ndex Mounting Conduction Casings Heat Sink Sys- Powerblocs Heat Sink PCB Standard Customised Alutronic in Short terns Mounting Extrusions Extrusions Detailed information on our products and solutions, please visit: www.alutronic.com

ALUTRONIC SOLUTIONS FOR COOL RESULTS ndex Mounting ^Conducti or^ Casings Heat Sink Sys- Powerblocs Heat Sink PCB Standard Customised Alutronic in Short tems Mounting Extrusions Extrusions PK718 including fan Alutronic extrusion PR718 with pre-milled mounting surface, inserted sheet to channel airflow and pre-mounted fan (12V or 24V) PK718 including fan and pressure chamber article

ALUTRONIC SOLUTIONS FOR COOL RESULTS PK719 including fan and pressure chamber article Insulation + Heat ndex Mounting Conduction Casings Heat Sink Sys- Powerblocs Heat Sink PCB Standard Customised Alutronic in Short terns Mounting Extrusions Extrusions Detailed information on our products and solutions, please visit: www.alutronic.com

ALUTRONIC SOLUTIONS FOR COOL RESULTS ndex Mounting ^Conducti or^ Casings Heat Sink Sys- Powerblocs Heat Sink PCB Standard Customised Alutronic in Short tems Mounting Extrusions Extrusions PK721 including fan and pressure chamber article

ALUTRONIC SOLUTIONS FOR COOL RESULTS PK712 including fan and pressure chamber article Insulation + Heat ndex Mounting Conduction Casings Heat Sink Sys- Powerblocs Heat Sink PCB Standard Customised Alutronic in Short terns Mounting Extrusions Extrusions Detailed information on our products and solutions, please visit: www.alutronic.com

ALUTRONIC SOLUTIONS FOR COOL RESULTS ndex Mounting ^Conducti or^ Casings Heat Sink Sys- Powerblocs Heat Sink PCB Standard Customised Alutronic in Short tems Mounting Extrusions Extrusions PK720 including fan and pressure chamber article