WATERFIN®
2Pages

{{requestButtons}}

Catalog excerpts

WATERFIN® - 1

WATERFIN® include the following range of products: WATERFIN® is the designation of Alucoat for the lacquered foil intended to be used for the production of fins for heat exchangers with hydrophilic properties. Its main advantages are: • Hydrophilic coatings specially developed by our technical department make the typical condensated water drop to become a layer avoiding the feasibility of ice bridges. It allows to produce smaller equipments. • Very good finishing, high thermal conductivity, good drawability and low density. • Collars height up to 12 mm could be obtained (depending of the thickness and characteristics of metal ). • WATERFIN® finishing has been developed to have highest possible resistance to scratches, assuring so that none of its other properties will be altered during fin production. • Studies performed by specialized independent organisms demonstrate that WATERFIN® does not favor the growth of micro-organisms. • WATERFIN® 100: with high hydrophilic properties it is the best choosing for standard environments. • WATERFIN® 700: Joins its high hydrophilic properties with a strong corrosion resistance that makes ideal for contaminated industrial environments. Also for all range of products an alternative with a pre-treatment coating is available that increases the corrosion resistance of the standard products. applications • Heat exchangers for food industry. • Heating and air conditioning systems for buildings. • Heat exchangers for cars, ships and airplanes. Alucoat supplies its product WATERFIN® in reels of wide until 1.600 mm, with core of steel or carton of up to 500 mm and maximum weight of 6 tonnes.

Open the catalog to page 1
WATERFIN® - 2

Product description: Aluminium foil from 100 to 300 µm with silica based or silica free lacquer for both sides. • Silica based or silica free lacquer • Aluminium Alloy 8011,8006,1100 • Thickness: 100-300 μm Recommended alloys: EN AW 8011A, EN AW 8006, EN AW 1100 (according to European Standards (EN 573-3)) • Silica based or silica free lacquer Customer can specify its needs in order to choose the best thickness, alloy and temper of the metal. technical data Property Hydrophilic Silica free Heat resistance Corrosion Resistance (Neutral Salt Spray) Contact angle (distilled water) Kesternich...

Open the catalog to page 2

All Alucoat Conversion catalogs and technical brochures

  1. AIRLID ®

    2 Pages

  2. LINFOIL ®

    2 Pages

  3. insulax® IP

    2 Pages

  4. insulax® BT

    2 Pages

  5. alupharm®

    2 Pages

  6. Alucoat® cs

    2 Pages

  7. INSULAX®

    2 Pages

  8. ALUCOAT-ALPP

    2 Pages

  9. ALUCOAT-CS

    2 Pages

  10. AIRFIN ®

    2 Pages

  11. ALUNID ®

    2 Pages

Archived catalogs

  1. ALUPHARM ®

    2 Pages

  2. ALUCOAT-CPS

    2 Pages