AIRFIN ®
2Pages

AIRFIN® is lacquered foil to be used for the production of fins for heat exchangers with a high corrosion resistance. Its main advantages are: • Highly cured polymers: AIRFIN´s are at least 300% more corrosion resistant than bare aluminium. • Very good finishing, high thermal conductivity, good drawability and low density. • Collars height up to 12 mm could be obtained. • AIRFIN® finishing have been developed to have highest possible resistance to scratches. • Studies performed by specialized independent organisms demonstrate that AIRFIN® does not favour the growth of micro-organisms. • AIRFIN® 300: ensures their properties AIRFIN® without fear of the aging by UV. The chemical decomposition of many polymers is catalyzed by the UV rays, all their properties unaffected by other side-reactions. • AIRFIN® 500: Demand the quality AIRFIN® 500 to strengthen the corrosion resistance and ensure a lengthening of the life of its exchanger. Can adapt to any environment. For all range of products an alternative with a pre-treatment coating is available that increases the corrosion resistance of the standard products. AIRFIN® includes the following range of products: • AIRFIN® 100: is an excellent solution of coating against corrosion of the fin. This product offers the desired protection in a wide range of colours. • Heat exchangers for food industry. • Heating and air conditioning systems for buildings • Heat exchangers for cars, ships and airplanes

• PU, epoxy or EPPU lacquer • Aluminium Alloy 8011,8006,1100 • Thickness: 100-300 μm • PU, epoxy or EPPU lacquer Alucoat supplies its product AIRFIN® in reels of wide until 1.600 mm, with core of steel or carboard up to 500 mm and maximum weight of 6 tonnes. Customer can specify its needs in order to choose the best thickness, alloy and temper of the metal. Product description: Aluminium foil from 100 to 300 µm with epoxy based lacquer, PU based lacquer, or EPPU double layer for both sides. Recommended alloys: EN AW 8011A, EN AW 8006, EN AW 1100 (according to European Standards (EN 573-3))...