BD2 + R24
30Pages

{{requestButtons}}

Catalog excerpts

BD2 + R24 - 1

BD2 + R24 TABELLA DI PERFORMANCE PERFORMANCES TABLEBD2 +R24 Reduction Ratio / Rapp. Riduzione For higher pressure please contact SAI Technical Department. Maximum speed to be revised according to distributor’s and valves' flow capability._ Per pressioni piu elevate consultare l'Ufficio Tecnico SAl.Velocita massima da adattare alla portata del distributore e delle valvole. SAI Spa 41122 Modena Italia www.saispa.it e-mail saispa@saispa.it Provisional leaflets subjected to change without notice. All data are real and calculated according to existing project

Open the catalog to page 1
BD2 + R24 - 2

BD2 + R24 PRODUCT COMPONENTS - R24 Gearbox - BD2 Hydraulic motor series - Standard fitting with D40 distributor * FEATURES - Internal connection between case and return line allows the unit to be installed without drain line for system with max return pressure up to 15 bar - Suitable for special distributor blocks designed to include valve cartridges - Overall dimensions and weight lower than direct drive units - Available stainless steel sleeve on shaft seal easy to replace without disassembling the gearbox . - High radial load capability and long life bearing * Available also in the...

Open the catalog to page 2
BD2 + R24 - 3

SAI Spa 41100 Modena Italia www.saispa.it e-mail saispa@saispa.it Provisional leaflets subjected to change without notice. All data are real and calculated according to existing project Approximative weight Motor casing oil capacity Gearbox casing oil capacity Max casing Pressure Peso Approssimativo Capacita olio corpo motore Capacita olio carter riduttore Pressione max in carcassa

Open the catalog to page 3
BD2 + R24 - 4

BV1 D47PV+R13 TABELLA DI PERFORMANCE PERFORMANCES TABLE Max Min Max Min Max Min SAI Spa 41122 Modena Italia www.saispa.it e-mail saispa@saispa.it Provisional leaflets subjected to change without notice. All data are real and calculated according to existing project

Open the catalog to page 4
BD2 + R24 - 5

BV1 D47PV+R13 DIMENSIONI D’INGOMBRO DIMENSIONAL DRAWING SAI Spa 41122 Modena Italia www.saispa.it e-mail saispa@saispa.it Provisional leaflets subjected to change without notice. All data are real and calculated according to existing project

Open the catalog to page 5
BD2 + R24 - 6

GM05+F5+R03D TABELLA DI PERFORMANCE PERFORMANCES TABLEGM5+F5+R03D R03D Gearbox Ratio / Rapp. Riduzione SAI Spa 41100 Modena Italia www.saispa.it e-mail saispa@saispa.it Provisional leaflets subjected to change without notice. All data are real and calculated according to existing project

Open the catalog to page 6
BD2 + R24 - 7

DIMENSION! D’INGOMBRO DIMENSIONAL DRAWING Distributor with double overcentre valve and high pressure pilot line(C) Max flow 120 lit/min. Pilot ratio 10:1 Max pressure 265 bar. Pressure setting=1.3 x working pressure. Press. setting range 100 to 350 bar Back-pressure in port B may adversely affect operation of the valve. Distributore con doppia valvola di bilanciamento e valvola di pilotaggio ad alta pressione(C). Portata max 120 lit/min. Rapporto di pilotaggio 10:1 Pressione max 265bar Pressione di taratura =1.3 x press.di lavoro. Gamma di taratura da 100 a 350 bar. Contropressione in port...

Open the catalog to page 7
BD2 + R24 - 8

GEARBOX R03D The gearbox R03D is an extremely compact one stage planetary reduction gearbox, designed to run silently, with a long lifetime and to require minimum maintenance. Ratio 4.28:1 RIDUTTORE R03D Riduttore planetario ad uno stadio di riduzione caratterizzato da ridotte dimensioni, funzionamento silenzioso, lunga durata e minime esigenze di manutenzione. Rapporto di riduzione 4.28:1 Maximum torque This is the maximum output torque that the planetary unit can transmit in a short time without causing damage to the internal cmponents and structure. This value must be considered as the...

Open the catalog to page 8
BD2 + R24 - 9

GM05A D504 MOTOR PLUS F5 BRAKE PLUS R03C GEARBOX MOTORE GM05A D504 CON FRENO F5 CON RIDUTTORE R03C GM05A+F5+R03C PERFORMANCES DATA Nominal displacement/cilindrata nominale Drive unit casing oil capacity: 1.6 l Continuous casing pressure: 5 bar Motor casing pressure peak: 10 bar For higher pressure pls consult SAI tech. Dept. Max.speed to be revised according to distributor’s and valves’ flow capability. SAI Spa 41100 Modena Italia www.saispa.it e-mail saispa@saispa.it Capacita olio del gruppo : 1.6 l Pressione in carcassa in continuo: 5 bar Pressione in carcassa di picco : 10 bar Per...

Open the catalog to page 9
BD2 + R24 - 10

D504 Distributor with doubl e overcentre valve and high pressure pilot line(C) Max flow 120lit/min. Pilot ratio 10:1 Max pressure 265 bar. Pressure setting=1.3 x working pressure. Press. setting range 100 to 350 bar Back-pressure in port B may adversely affect operation of the valve. Distributore con doppia valvola di bilanciamento e valvola di pilotaggio ad alta pressione(C). Portata max 120lit/min. Rapporto di pilotaggio 10:1 Pressione max 265bar Pressione di taratura =1.3 x press.di lavoro. Gamma di taratura da 100 a 350 bar. Contropressione in port B puo causare malfunzionamento della...

Open the catalog to page 10
BD2 + R24 - 11

GEARBOX R03C The gearbox R03C is an extremely compact one stage planetary reduction gearbox, designed to run silently, with a long lifetime and to require minimum maintenance (Ratio 4.28:1) RIDUTTORE R03C Riduttore planetario ad uno stadio di riduzione caratterizzato da ridotte dimensioni, funzionamento silenzioso, lunga durata e minime esigenze di manutenzione Rapporto di riduzione 4.28:1 Maximum torque This is the maximum output torque that the planetary unit can transmit in a short time without causing damage to the internal cmponents and structure. This value must be considered as the...

Open the catalog to page 11
BD2 + R24 - 12

GM1+GR324 TABELLA DI PERFORMANCE PERFORMANCES TABLE GM1+GR324 SAI Spa 41100 Modena Italia www.saispa.it e-mail saispa@saispa.it Provisional leaflets subjected to change without notice. All data are real and calculated according to existing project

Open the catalog to page 12
BD2 + R24 - 13

DIMENSIONI D’INGOMBRO DIMENSIONAL DRAWING PRODUCT COMPONENTS - GR324 Gearbox - GM1 Hydraulic motor serie - Standard fitting with D40 SAI Spa 41100 Modena Italia www.saispa.it e-mail saispa@saispa.it Provisional leaflets subjected to change without notice. All data are real and calculated according to existing project

Open the catalog to page 13
BD2 + R24 - 14

GM1+GR328 TABELLA DI PERFORMANCE PERFORMANCES TABLE GM1+GR328 Reduction Ratio / Rapp. Riduzione * Peak pressure limitation due to output toque limit of 28000 Nm *Pressione di picco limitata per la massima coppia ammissibile di 28000 Nm SAI Spa 41122 Modena Italia www.saispa.it e-mail saispa@saispa.it Provisional leaflets subjected to change without notice. All data are real and calculated according to existing project

Open the catalog to page 14

All Altantek Hidrolik Pazarlama ve Tic. A.S. catalogs and technical brochures

  1. GPL009

    76 Pages

  2. HPLDF

    7 Pages

  3. GPG009

    25 Pages

  4. M4MF

    27 Pages

  5. FITTINGS

    3 Pages

  6. MINING Hoses

    41 Pages

  7. DRILLING

    14 Pages

  8. Hydroforming

    1 Pages

  9. UNIFLEX

    22 Pages

  10. HOSES

    30 Pages