Pleiade®polymeric membranes
Pleiade®polymeric membranes
- Membrane Type: Flat-sheet PAN or PVDF membranes.
- Module Composition: Each module contains 20 to 250 plates, with each plate having a surface area of 0.35 m².
- Pore Size: Ranges from 30 nm (~150 kDa) to 200 nm, with alternative sizes available on request.
- Liquid Path: Operates in cross-flow mode with a thickness of 1.65 mm or 3 mm.
- Temperature Limitation: Up to 45°C.
- Flexible membrane surface area ranging from 7 m² to 88 m².
- Easy maintenance with ground-level access and individual isolation for troubleshooting.
- High durability with membranes clipped on polypropylene plates, separated by nitrile seals, and framed in stainless steel.
- Industries: Automotive, surface treatment, agriculture, food, chemicals, and more.
- Processes: E-coat paint bath recycling, demineralized rinsing water recycling, clarification, and liquid product recovery.
- Additional Uses: Bioreactor treatment, pre-filtration for reverse osmosis, and wastewater recycling.
- Long-time proven performance in batch or continuous operations.
- Robust design with open channel liquid paths for enhanced durability.
Catalog excerpts
Pleiade® polymeric membranesTechnical data sheet ©RELIS ALS'/S Group ^ Long-time proven membranes PLEIADE® modules consist of flat-sheet PAN or PVDF membranes installed on plates. Each module includes from 20 to 250 plates. Each plate has 0.35 m2. The membrane pore size is from 30 nm (~150 kDa) to 200 nm. Alternative pore size possible on demand. The module operates in cross-flow mode with open channel (liquid path without spacer). Liquid path thickness of 1.65 mm or 3 mm. ^ Experiences of ALSYS in the field of polymeric membranes technology ^What makes PLEIADE® unique? ^ Flexible membrane surface from 7 m2 to 88 m2 ^ Easy maintenance: all membranes are accessible from ground level and can be individually isolated for troubleshooting ^ Long-time proven polymeric membranes ^ Designed for robust batch or continuous operations: open channel (liquid path without spacer) with large thickness ^ High durability: membrane is clipped on a polypropylene plate. Plates are separated by nitrile seals. Frame is made of stainless steel PLEIADE® polymeric membranes • Fabric-backed polymer • Pore size: from 30 nm to 200 nm. Alternative pore size possible on demand. • Temperature limitation: up to 45°C This document and its content are the property of Orelis Environnement SAS - All rights reserved - EN0071 - Pleiade® polymeric membranes - Data Sheet — V22.11.18
Open the catalog to page 1
ALSYS Pleiade® ALSYS Pleiade® principle 4 Pleiade® Module ALSYS Group Orelis Environnement SAS - ALSYS Group - 382, Avenue du Moulinas - 30340 Salindres - France - ALSYS-Group.com [email protected] This document and its content are the property of Orelis Environnement SAS - All rights reserved - EN0071 - Pleiade® polymeric membranes - Data Sheet — V22.11.18
Open the catalog to page 2All Alsys catalogs and technical brochures
ALSYS-EN0302-PERVAPORATION2 Pages
- Filtration unit
- Filter element
- VOC-free liquid filtration unit
- Filtration system
- Absorption filtration unit
- Small wastewater treatment plant
- Gas filtration unit
- Gas filter medium
- Liquid filtration system
- Absorption filtration system
- Gas purifier
- Gas filtration system
- Membrane filtration unit
- Filtration membrane
- Floor-standing gas purifier
- Membrane filtration system
- Nitrogen gas purifier
- High-performance diaphragm
- Surface diaphragm
- Knitted mesh filter medium