Rotary Switch 8-position Low-profile Vertical Type

Product catalog summary

Overview: The document provides detailed specifications and configurations for the SRBV Series rotary switches, which are low-profile, 8-position, vertical type switches. These switches are designed for flexibility in set design due to their compact 7.5mm height.

Specifications: The rotary switches have a maximum rating of 0.3A at 16V DC and a minimum rating of 50BA at 3V DC. They feature a contact resistance of 50mΩ max initially and 150mΩ max after operating life. The operating life is specified at 10,000 cycles both with and without load.

Design and Configuration: The switches come in various actuator lengths (15mm and 20mm) and configurations, with options for 3 to 8 positions. The document includes detailed diagrams of the PC board mounting face and standard circuit diagrams.

Mechanical Performance: The switches are designed to withstand a rotational torque of 30±15 mN·m and have a shaft wobble specification depending on the shaft length. The actuator strength is specified for different series, with SRBV and SRBQ having a load at the tip of the shaft of 1N.

Environmental Performance: The switches are tested for durability under various conditions, including cold, dry heat, and damp heat. They are also rated for manual, dip, and reflow soldering conditions.

Additional Components: The document lists attached parts such as hexagonal nuts and flat washers, which are included with the product. Detailed dimensions for these components are provided.

Notes: The document mentions that products other than those listed are available upon request, and purchase orders should be placed per the minimum order unit.

Catalog excerpts

Refer to P.171 for shaft configurations. Refer to P.173 for attached parts.

Open the catalog to page 1

Style PC board mounting hole dimensions ʢ Viewed from the direction A ʣ DetectorPushSlide > PC boardmounting face M9 L L 1 15 7 L 0.57.543.5L17 16.25.4 20 12 2-Ѹ2 holes 1610-0.9 holes Center of shaft 0.1 1.11.5 Rotary > 8 11.1 G 0.75 a 18.31.1 Terminal No. 5Terminal No. 6 0.8 3 -0.2 0 Encoders > 2.4 Terminal No. 1AC0.5 2.52.52.5 2.5 Power > 2.52.5 10.5 18.22.52.50.6 Dual-in-linePackage Type TACT Switch > TM Custom-Products > Number of poles 1 3-positions > ᶇᶈᶉᶊᶋ

Open the catalog to page 2

Unit:mmUnit:mm The shaft shows the position in which it is turned fully counterclockwise. The shaft shows the position in which it is turned fully counterclockwise. > ᶃ Shaft length L A B C ᶃ Cutting Shaft ᶄ Die Casting Shaft 15 6 1 7 20 10 2 11 0.5 18 tooth serrationL ѱ 0.5 18 tooth serrationL DetectorPushSlide BA R 6 0.7 衶 1 ĸ6 Shaft length L R > C1C C16.1 Except serrated part 15 8 20 12 Details About Serration Rotary 芢 1 ʣ The mold dimensions of standard serration and thedimensions of test jigs are as shown in the figure at left. > 98 90 ˚ ˚ 20 ˚ Testing jigdimensions Shaft dimensions Encoders...

Open the catalog to page 4

The following parts are included with the product. > Hexagonal nutFlat washer DetectorPushSlide > 11 M9 14 0.5 9.1 Rotary Encoders > G 0.75 2 Power Dual-in-linePackage Type > TACT Switch > TM Custom- Products Hexagonal nutFlat washer > 211 M7 踸127.10.5 G 0.75

Open the catalog to page 5