Catalogs >
ALPS Electric >
Magnetic Rotary Type RDCC0 Series

Magnetic Rotary Type RDCC0 Series
4Pages

Catalog excerpts

RDCC0 Magnetic Rotary Type Non-contact magnetic rotary sensor achieving high precision and long life ■ Typical Specifications Items Rated Voltage Operating life Total resistance Operating temperature range Product Line Mounting method Effective electrical Linearity angle guarantee range Connector type Minimum order unit（pcs.） Flat type Packing Specifications Tray 1 case /export packing Export package measurements（mm） Resistive Position Sensors Number of packages（pcs.） 1 case /Japan

Open the catalog to page 1

Resistive Position Sensors / Product Specifications Method for Regulating the Linearity Model RDC80 Model RDC10 / RD7 With rated voltage applied between terminals 1 and 3, the straight line which connects the measured output values VB and VA at specified reference positions B and A is assumed to be an ideal straight line, so that deviation against the ideal straight line when the voltage applied between terminals 1 and 3 is assumed to be 100％ can be expressed as a percentage. 1. Reference taper：100％/A 2. Index point is 50% output point(RDC50/RDC90/RDCC0) The center is in the configuration...

Open the catalog to page 2

Resistive Position Sensors List of Varieties Type Rotary Type Magnetic Rotary Type Vertical Horizontal Effective electrical angle（° ） Linearity guarantee range（° ） Operating temperature range Operating life Resistive Position Sensors Operating force Rotational torque Life cycle (availability) Mechanical performance Total resistance tolerance Electrical performance Damp heat Environmental performance Terminal style Page Resistive Position Sensors Measurement and Test Methods・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 477 Resistive Posi

Open the catalog to page 3

Resistive Position Sensors / Soldering Conditions Reference for Manual Soldering Series Soldering time Reference for Dip Soldering Preheating Soldering surface temperature Soldering time Heating time Soldering temperature Example of Reflow Soldering Condition Cleaning Cleaning should not be attempted. Type of solder to be used Use cream solder that contains 10 to 15 %wt flux. Number of solder applications - apply solder only once Recommended reflow conditions Resistive Position Sensors Room temperature Notes 1. When using an infrared reflow oven, solder may not always be applied as...

Open the catalog to page 4