RDC10 Linear Type The high accuracy space saving design contributes to reduced weight and size of sets ■ Typical Specifications Items Rated Voltage Operating life Total resistance Operating temperature range  Product Line Travel（mm） Resistive Position Sensors Minimum order unit（pcs.） Notes 1. RDC1014, RDC1022, RDC1032 and RDC1047 Series can be for automotive use. 2. RDC1014, RDC1022, RDC1032 and RDC1047 Series are available in different varieties to the above. See Product Varieties (P.474). Packing Specifications Tray Number of packages（pcs.） 1 case /Japan 1 case /export packing Export package measurements（mm） Refer to P.474 for product varieties. Refer to P.477 for product specifica

 Dimensions Photo Resistive Position Sensors Caulking height Sizes in （ ） are applicable to RDC1047 only.

Linear Type / Product Varieties In addition to the products listed, we can accommodate the follow specifications. Applicable to RDC1014, RDC1022, RDC1032, RDC1047 only ＊ Sizes in（ ）are applicable to RDC1047 only 4.5 （4.4） le  Terminal Variety Note Shows the specification recommended by Alps. Resistive Position Sensors

Resistive Position Sensors / Product Specifications  Method for Regulating the Linearity Model RDC80 Model RDC10 / RD7 With rated voltage applied between terminals 1 and 3, the straight line which connects the measured output values VB and VA at specified reference positions B and A is assumed to be an ideal straight line, so that deviation against the ideal straight line when the voltage applied between terminals 1 and 3 is assumed to be 100％ can be expressed as a percentage. 1. Reference taper：100％/A 2. Index point is 50% output point(RDC50/RDC90/RDCC0) The center is in the configuration diagram...

Linear Type Effective electrical angle（° ） Linearity guarantee range（° ） Operating temperature range Life cycle (availability) Mechanical performance Operating force Rotational torque Total resistance tolerance Cold Environmental performance Electrical performance Resistive Position Sensors Operating life Damp heat Terminal style Page Resistive Position Sensors Measurement and Test Methods・ ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 477 Resistive Position Sensors Soldering Conditions・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・

Resistive Position Sensors / Soldering Conditions Reference for Manual Soldering Series Soldering time Reference for Dip Soldering Preheating Soldering surface temperature Soldering time Heating time Soldering temperature Example of Reflow Soldering Condition Cleaning Cleaning should not be attempted. Type of solder to be used Use cream solder that contains 10 to 15 %wt flux. Number of solder applications - apply solder only once Recommended reflow conditions Resistive Position Sensors Room temperature Notes 1. When using an infrared reflow oven, solder may not always be applied as intended....