*mydirectindustry

Catalogs
ALPS Electric
Compact Two-way Detection Type SSCM Series

Compact Two-way Detection Type SSCM Series

Product catalog summary

Overview: The document provides technical specifications and guidelines for various types of detector switches, including slide, push, rotary, and dual-in-line package types. It covers general-purpose, water-proof, and fast-switching types, with a focus on compact, low-profile designs.

Specifications: The switches have a low-profile 1.5mm body with two-way detection capabilities. Key specifications include a maximum rating of 1mA 5V DC and a minimum rating of 50μA 3V DC. Initial contact resistance is 2Ω max, increasing to 5Ω max after operating life. The operating force is 0.35N max, with an operating life of 50,000 cycles both with and without load.

Mechanical and Environmental Performance: The switches are designed to withstand various mechanical and environmental conditions. Terminal strength ranges from 0.5N to 3N, and actuator strength from 1N to 10N. They can operate in temperatures ranging from -40℃ to +85℃ and have been tested for cold, dry heat, and damp heat conditions.

Soldering Conditions: The document outlines reflow and hand soldering conditions. Reflow soldering uses a double heating method with specific temperature profiles for different series. Hand soldering temperatures range from 300℃ to 350℃, with specific time limits for each series.

Product Line and Packaging: The product line includes various models with different features such as location lugs and bosses. Packaging specifications include reel sizes and the number of packages per reel, with export measurements provided.

Recommendations: It is recommended to verify soldering conditions prior to use, as they may vary depending on the soldering machine and PC board material.

Catalog excerpts

Compact Two-way Detection Type SSCM Series-1

SSCM Compact Two-way Detection Type Low-profile 1.5mm body with detection from both left / right directions ■ Typical Specifications Product Line Items ■ Packing Specifications Taping PC board mounting hole and land dimensions (Viewed from direction A) Dimensions drawing is for type with location lugs. | Terminal Layout (Viewed from Direction A) Circuit Diagram ALPS Refer to P.73 for soldering conditions.

Open the catalog to page 1

Compact Two-way Detection Type SSCM Series-2

Note • Indicates applicability to all products in the series.

Open the catalog to page 2

Compact Two-way Detection Type SSCM Series-3

Detector Switches Soldering Conditions Heating method: Double heating method with infrared heater. Temperature measurement: hermocouple φ0.1 to 0.2 CAKor CCTat soldering portioncopper foil surface T . A heat resisting tape should be used for fixed measurement. Temperature profile Example of Reflow Soldering Condition Room temperature Dual-in-line Package Type SeriesReflow type SPVE SPVL SPVN Water-proof Type Generalpurpose Type SPVT SSCM SPVQC, SPVQE Fast Switching Type Notes 1. The condition mentioned above is the temperature on the mounting surface of a PC board. There are cases where the PC...

Open the catalog to page 3

All ALPS Electric catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list