- Catalogs
- ALPS Electric
- Compact Thermal Printer PTMBL1E Series
Compact Thermal Printer PTMBL1E Series
Compact Thermal Printer PTMBL1E Series
- Paper Setting: Easy loading.
- Printing Method: Line thermal.
- Number of Dots per Line: 384 dots.
- Dot Density: Horizontal density of 8 dots/mm, vertical density of 8 (16) dots/mm.
- Paper Feed Pitch: 0.125mm/2 steps.
- Printing Speed: Maximum speed of 90mm/s.
- Printing Width: 48mm.
- Paper Width: 58mm with a tolerance of +0 to -1.
- Pulling Force: 0.49N (50gf) or more.
- Holding Force: 0.98N (100gf) or more.
- Sensors: Reflective photo interrupter for paper sensing; no head temperature or lock sensor.
- Operating Voltage: Head and motor drive require 4.2V to 9.5V; head logic requires 2.7V to 5.25V.
- Current Consumption: Head drive at 3.3A/Head, motor drive at 300mA/Phase, head logic at 24mA (at 5V).
- Temperature Range: Print quality maintained between 0 to 40℃; operating range from -5 to 50℃; storage range from -25 to 70℃.
- Head Life: Abrasion resistance up to 50km, pulse activation up to 100 million pulses.
- Mechanical Dimensions: Width 67.6mm, Depth 23.5mm, Height 30.0mm, Weight approximately 34g.
- Recommended Paper: Nippon Paper TF50KS-E2 (Blumberg TF 00 2200).
- Additional Features: No platen cover or release lever; head pressed by plate spring; FPC located at the center; motor diameter φ15; motor resistance 10Ω; head resistance 200Ω.
Catalog excerpts
Compact Thermal Printer Contributing to set design flexibility with compact and lightweight mechanisms. ■ Typical Specifications Items Paper setting Easy loading Printing method Line thermal Specifications Items Number of dots per line Horizontal density Density of dot Dot pitch Vertical density Paper feed pitch Printing speed Printing width Paper width Paper thickness Pulling force Holding force Paper sensor Operating voltage Head temp. sensor Lock sensor Reflective photo interrupter 4.2V to 9.5V Head logic Current consumption Head and motor drive Motor drive Head logic Temperature Head drive Storage Head life Print quality Abrasion resistance Pulse activation Mechanical dimensions Weight Recommended paper Platen cover Release lever (Head) Pressed by FPC location Motor diameter Plate spring Center 15 Motor resistance Head resistance
Open the catalog to page 1
Compact Thermal Printer PTMBL1E Unit:mm Items
Open the catalog to page 2All ALPS Electric catalogs and technical brochures
HSFPAR007A1 Page
SKSN Series 4.5N1 Page
Rotary Type RD6R1A Series4 Pages
Linear Type RDC10 Series6 Pages
Archived catalogs
FM/AM Tuner for HD Radio3 Pages
push-button switch4 Pages
Compact Thermal Printer2 Pages
- Connector
- Data connector
- Force sensor
- Angular encoder
- Incremental encoder
- Single-pole switch
- Incremental rotary encoder
- Pressure probe
- Technology switch
- Absolute rotary encoder
- Position transducer
- Multipole switch
- Solid-shaft rotary encoder
- Hollow-shaft rotary encoder
- Linear position transmitter
- Electromechanical switch
- Safety electric switch
- Analog pressure sensor
- Label printer
- Compact rotary encoder