(( ALPHA WIRELESS Common Name 18 Port (2P/4P x 3) 1.9M Low Band, Mid Band Modular Tri-Sector, T2 Series Frequency Ports Tilt Gain Beamwidth PRODUCT INFORMATION Stack Part Name Description B1 Base Stack This is the antenna stack supplied with the AWT2-3910. There is a Mount Plate located on the bottom of the Base Stack to attach to the Monopole. X2 Extension Stack This antenna stack is not supplied with the AWT2-3910. It can be bought at a later date and mounted on top of the Base Stack if additional capacity is required The Modular Tri-Sector T2 Series is a flexible antenna platform designed for Streetwork deployments. The AWT2 Platform is made up using discrete parts. The AWT2-3910 consists of two modular antenna stacks which are detailed in the table below: Stack Type Frequency Bands Ports per Stack Each stack is made up of three panels that are positioned at 0°, 120° and 240° in the Azimuth plane. These individual panels are replaceable in the field for upgrade or maintenance purposes. Note #1: The Alpha Wireless AWT2 series can only support a single Base Stack and a single Extension Stack. The Alpha Wireless AWT4 series can support a single Base Stack and up to three Extension Stacks. Note #2: Both the AWT2 and AWT4 have a mounting plate to enable mounting number of Active Antenna units on top, weight permitting. Sector antennas support multiple antennas into one attractive package. These canisters deliver an elegant macro solution for pole-top, rooftop and streetworks applications. Alpha Wireless produces one of the smallest diameter canisters in the marketplace. STANDARD & CERTIFICATIONS • The AWT2 Series supports up to two modular stacks. • Field upgradable sectors without decommissioning the other sectors. • Three sector canister with sectors orientated at 0°, 120° and 240° in the Azimuth Plane • Low PIM performance to reduce interference. ecification follow the definitions and recommendations per NGMN P-Basta, Release 9.6.

ALPHA WIRELESS Radiation Pattern Files For radiation pattern files, please login at www.alphawireless.com

TECHNICAL SPECIFICATION Mechanical Specifications Array Layout and RET Information

TECHNICAL SPECIFICATION Mechanical Illustration Base Stack RF Jumpers Base Stack This contains the Antenna Sectors. Mounted onto the Base Stack I nterface. The top of the Base Stack has a mounting flange onto which the Extension Stack is mounted. Note: The Extension Stack is not supplied with the AWT2-3910. It can be ordered separately. At the top of the Extension Stack there is a a mounting flange onto which an Active Antenna unit (AAU) can be mounted. Feeders from the Radio Cabinet feed directly into the connectors located at the bottom of the Base Stack. RF Jumpers are routed behind the Base...

AWT2-3910 TECHNICAL SPECIFICATION Connector Plate Images Showing Low Band / Mid Band Connector Plate located at bottom of Base Stack. Each RET Motor is located at the bottom of each antenna sector as part of the Connector Plate. Each RET motor can be accessed individually and if necessary replaced individually by releasing two screws and sliding out the RET Motor Cartridge. A new RET Motor Cartridge can be slid back in as replacement. Page 5/6 Publish Date: 27.01.2025

AWT2-3910 TECHNICAL SPECIFICATION Mounting Bracket Kit 3 inch Bracket description Mounting Kit Tilt Range Mounting Kit Pole Diameter Galvanized Steel Ordering Info Order Code - Antenna Enclosed Remote Electrical Tilt (eRET) with 4.3-10 Connectors. Order Code - Accessories RF Jumper Cable, connector types 4.3-10 (m) / N-Type (m), length 2 metres (6'6") RF Jumper Cable, connector types 4.3-10 (m) / Nex10 (m), length 2 metres (6'6") Portable AISG Controller AISG Jumper Cable Lengths 3 metres (9' 10") AISG Jumper Cable Lengths 10 metres (32' 9") Enquiries Global Headquarters Ashgrove Business Centre,...