*mydirectindustry

ODR 2000™

Product catalog summary

Overview: The ODR2000™ is an advanced oscillating disc rheometer designed to test the cure properties of mixed rubber compounds. It measures viscosity, cure times, and the final cure state, making it suitable for both quality control and research and development in the rubber industry.

Performance Features:

Superb temperature stability and control.
High sensitivity to mixing errors.
Available with 1.0° or 3.0° eccentrics for different strain levels (14% or 42%).
High temperature capability up to 230°C.
Equipped with enterprise software and a constant volume sample cutter.

Testing Features:

Digital temperature controllers ensure precise temperature management.
Strain gauge force measurement for accurate readings.
Digital motor and the stiffest ODR linkage available enhance performance.
Easy rotor removal facilitates handling of stiff cured samples.

Specifications:

Testing Standard: ASTM D2084.
Temperature Range: Ambient to 200°C (392°F), with an optional extension to 230°C (446°F).
Oscillation Frequency: 1.667 Hz (100 cpm).
Electrical Requirements: 100/110/120/130 VAC ±10%, 60 ±3 Hz, single phase; 200/220/240/260 VAC ±10%, 50 Hz ±3, 5-amp single phase.
Minimum Air Pressure: 60 psi (4.2 kg/cm², 414 kPa).
Dimensions: Width 68 cm (27 in), Height 132 cm (52 in), Depth 76 cm (30 in).
Weight: Net 177 kg (389 lb), Gross 280 kg (616 lb).

Catalog excerpts

Oscillating Disc Rheometer Designed to test the cure properties of mixed rubber, the ODR2000™ is a modern version of the rubber industry’s first rheometer. Measure the viscosity, cure times and final cure state of mixed rubber compoun

Open the catalog to page 1

Oscillating Disc Rheometer Testing Features • Measure cure properties of rubber compounds • Digital temperature controllers • Strain gauge force measurement • Digital motor • Stiffest ODR linkage available • Rotor comes out easily to help remove the stiffest cured sample Performance Superb temperature stability and control Good test sensitivity to mixing errors Suitable for quality control or research and development Options • • 1.0° (Standard) or 3.0° (14% or 42% strain) Eccentrics • Enterprise Software • Constant Volume Sample Cutter Specifications Testing Standard: Temperature: Oscillation...

Open the catalog to page 2

All Alpha Technologies U.K. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list