*mydirectindustry

AT10™

Product catalog summary

Overview: The AT10™ Tensile Tester is a universal, table-top testing instrument designed for evaluating the tensile properties of materials such as rubber, plastics, and more. It is suitable for both quality control (QC) and research and development (R&D) applications.

Features: The AT10™ offers a comprehensive set of features including a data point selector, custom data point calculator, and a basic license for various tests such as tension, tear, compression, peel, adhesion, and O-ring tests. It allows for easy reanalysis and recalculation of results, and includes an optional thickness gauge for additional data points.

Performance Specifications: The tester has a maximum load capacity of 10kN and can perform tests at speeds ranging from 0.00004 in/min to 60 in/min. It provides high accuracy in force, speed, position, and strain measurements, with compliance to ASTM E4 and E83 standards.

Technical Specifications:

Compliance: CE Approved
Load Frame Configuration: 2 column, table-top electromechanical
Max. Rated Force Capacity: 10kN
Test Space: Single zone
Typical Specimens: Plastics, yarn and cord, adhesives, elastomers, foam
Position Resolution: 0.000002 in
Power Requirements: 120-240VAC, 50/60HZ, 5A Single Phase
Air Pressure: 90-120 psi (6.2-8.3 bar)

Accuracy and Safety: The AT10™ ensures high accuracy with a combined error of 0.018% and linearity of 0.01%. It includes safety features such as over-force and travel limits, and offers a data acquisition rate of 0.02 sec.

Physical Dimensions: The tester measures 25 in (W) x 30 in (D) x 59 in (H) and weighs 357 lbs. It provides a vertical test space of 31.5 in.

Benefits: The AT10™ allows users to determine material strength under various conditions and measure the maximum load a material can withstand, providing valuable insights for material testing and development.

Catalog excerpts

Universal, table-top tensile tester for rubber, plastics, and other materials. A table top model with a maximum load value of 10kN, the AT10 performs tension, compression, peel,tear,adhesion,O-ring and other tests for QC and R&D applications.

Open the catalog to page 1

Performance - The AT10™ is a comprehensive computer-controlled testing instrument with a full range of user features, including a data point selector, custom data point calculator, and a basic license for tension, tear, compression, peel, adhesion, and O-ring tests. It meets ASTM E4 and E83 Standards and is suitable for quality control and research and development. Features - Benefits - Easily reanalyze and recalculate results Simple solution for adding additional data points after a test has been performed Measure tensile modulus of materials Optional thickness gauge Allowing the user to determine...

Open the catalog to page 2

All Alpha Technologies U.K. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list