Laser system A L- C R O S S MOBILE FIBER LASER SYSTEM FOR WELDING The values of the AL-CROSS: Robust, user-oriented, mobile and powerful Its housing is robust with sturdy aluminum handles that provide shock protection for edges and housing and supports the easy movement of the system. There are integrated eyelets for loading and stowing, plus a hook for a winch. User-oriented are the generous storage areas for this and that, as well as the specially designed holders that can be fixed to the hole pattern on the sides of the welding laser to accommodate welding wire, joystick, the foot pedal, safety glasses and tools. The 5th wheel on the laser enables the direct transport of the gas bottle, which is extremely practical. experience the mobility of the arm, the lenses and the laser head is to try it out! The fiber laser is powerful, because 450 W/600 W constant laser power are waiting for use. Welding is either pulsed or in CW mode. The welding behaviour can be influenced via integrated pulse shapes. The parameters are set either via the colour display or via the multifunction footswitch or the new AL-DRIVE control unit. The display is titlable (orientable) in order to always have an optimal view and an integrated keyboard is within easy reach of the operator. The AL-CROSS is mobile thanks to its easily movable wheels. It fits through standard doors and with its transport height of 1.25 m (display can be tilted) into every small van with a loading height of at least 1.40 m. And the best way to ALPHA LASER GmbH

And best of all: the "senior mode" which allows the operator to set or read the laser parameters without reading glasses. With the new control unit AL-DRIVE, you steer the axes of the AL-CROSS, set them in semiautomatic mode and adjust the laser parameters. The pulse trigger, the R axis and the fast gear are located in the joystick. And whether you are lefthanded or right-handed doesn't matter, because the buttons can be freely programmed. Joystick AL-DRIVE Technical data AL-CROSS 450 FAL-CROSS 600 F LASER Laser type/wave length Average power CW power Peak pulse power Pulse energy Pulse duration...

A software feature is a rotatable coordinate system to adapt to the workpiece surface. And then there are a few fine apps for... Circular welding This allows two tubes to be butt welded together or, for example, a lid to be welded onto a sensor housing. Another feature here is the ramp function, with which the power can be reduced over the pulse width at the end of the weld. Welding a plane With this app a square or rectangular area can be defined and then be welded on automatically. Shaft welding Here, a shaft (e.g. bearing seat) can be auto-maticlly welded on. It is easy to enter the parameters...