Ideal for bathrooms with poor ventilation, but not only, StopVapor guarantees perfect clearness of the mirror surface, in correspondence with the dimensions of the heating foil applied on the back. Easy to apply, StopVapor is self-adhesive: just place it, after removing the adhesive protection, on the back of your mirror at the desired position. It is enough to allow a 1 cm space between the wall and the mirror to let the power cable to come out. Typical standard dimensions: Alper can also produce dimensions according to the customer's design for single batches CHARACTERISTICS • Maximum dimensions: 1000x600mm (various sizes available on request) • Power and supply voltages on request • Excellent temperature uniformity • Functionality without the use of thermal protections, such as thermal fuses, thermal protectors, probes and sensors • Application of a wide range of double-sided adhesives • Wiring on customer specification • Class II and III construction • 110/230/240V supply voltages and 12/24/48V low safety voltage • Customer specific design • Min temperature: 35-40 °C • Construction according to directive 2014/35/UE Test according to EN 60335-1 and EN 50106 • S.I. 2016 No. 1101 (Electrical Equipment (Safety) Regulations 2016) BS EN 60335-1 BS EN 50106 • UL approval E466385, upon request C€ CP Hohs Upon request ALPER S.R.L. Via San Giovanni Bosco, 50 _ Italia _ 36022 Cassola [VI) _ Italy Tel. +39 0424383895 _ info0alper.it _ www.