PVC-SRGL
1Pages

Catalog excerpts

Plastic circular ventilation pipes Description Round plastic ventilation pipes are joined by welding (or PVC gluing up to 0250). Manufactured in accordance with DIN 8062 standards for ventilation pipes. PVC pipes of larger diameter than 500mm are made of sheets. Pipes made of PP, PPs, PE and PPELs are extruded. Other wall thicknesses are available on request. Available materials - designation example PVC-SRGL-... - PVC polyvinyl chloride PP-SRGL-... - Polypropylene PPs-SRGL-... - PPs flame resistant polypropylene PE-SRGL-... - Polyethylene Available materials - upon special order PVCW-SRGL-... - Polyvinyl chloride white PPELs-SRGL-... - Polypropylene EL flame resistant and with electrical conductivity PVDF-SRGL-... - Polyvinylidene fluoride Designation example: Product Code: PVC - SRGL - aaa material type - SDR (Standard dimension ratio) describes the correlation between the pipe outside diameter and the pipe wall thickness. The higher SDR is, the smaller the wall thickness is. SDR 127 is a special series for ventilation pipelines. ALNOR ventilation systems is a legally protected trademark and technical patent. All rights reserved. difference to the standard that indicates: s=2.8mm for size DN355 "pipes made of sheets

Open the catalog to page 1

PVC-SRGL 1Pages

Catalog excerpts

All ALNOR Ventilation Systems catalogs and technical brochures

PVC-SRGL
1Pages