*mydirectindustry

Marine equipment

Product catalog summary

Introduction
The document introduces the IZOL®system and ALNOR® ventilation systems, focusing on pre-insulated ducts and fittings for indoor and outdoor use. These systems feature galvanized covers with mineral wool insulation and are designed for efficient air distribution.

Specifications
The IZOL®system offers ducts with nominal diameters from 100 to 500 mm and insulation thicknesses of 10, 16, 25, and 50 mm. The ALNOR® system includes mineral wool and air insulation, with diameters ranging from 80 mm to 280 mm. Both systems emphasize airtightness and compliance with relevant standards.

Technical Specifications
Detailed dimensions and tolerances are provided for ducts and fittings. The SPIRAL® system is noted for its airtightness, meeting class D requirements. Various components such as end caps, dampers, and silencers are described with their specific dimensions and materials.

Materials and Construction
Components are primarily made from galvanized steel, with options for stainless steel, aluminum, and copper. The ducts feature external corrugation for increased stiffness and compression strength.

Installation and Connection
Installation involves using clamps and bands, with factory-installed EPDM rubber gaskets for airtight connections. Guidelines emphasize the importance of clean and precise installation to maintain system integrity.

Product Range
The document details various pre-insulated components, including bends, reducers, and silencers, with specific dimensions and weights. It also covers strut channels, roof valves, and mounting frames.

Ordering Information
Product codes are provided for ordering, indicating type, insulation thickness, diameter, and angle for bends. The document stresses the use of authorized products and warns against unauthorized modifications.

Standards and Compliance
The systems comply with standards such as PN-EN 1506:2001 and PN-EN 12237 for dimensions and tightness. Hygiene and acoustic measurement standards are also mentioned.

Conclusion
ALNOR® ventilation systems offer a comprehensive range of pre-insulated ducts and fittings designed for efficient and reliable air distribution. The document provides detailed specifications and ordering guidelines to ensure proper selection and installation.

Catalog excerpts

MARINE system – Ventilation duct & equipment

Open the catalog to page 1

Pre-insulated ducts and fittings IZOL®system

Open the catalog to page 2

TECHNICAL SPECIFICATION We would like to introduce our offer for IZOL®system pre- insulated ducts and fittings. Pre-insulated ducts and fittings, used inside and outside, are called IZOL®system. IZOL®system consists of inside and outside galvanised cover, and mineral wool in the middle. Nominal dimension of diameter 100 -500 mm always defines inside ducts diameters and fittings diameters. Three type of isolation are used: • 10 isolation - nominal isolation thickness is 10 mm, stric- tly corresponds to inside and outside SPIRAL®system • 16 isolation - nominal isolation thickness is 16 mm, stric-...

Open the catalog to page 3

Download Wentyle Download AlnorCAM Order in B2B Pre-insulated ducts and fittings TECHNICAL SPECIFICATION Tolerance for fittings Ødnom [mm] Connection layout 1. Connection. If isolation is outside, it is important to use outside covers. Suitable, for example, are isolation clamps MSFK with EPDM rubber, resistant and leakproof. Signage All Alnor products are marked class B building specification and product codes are up to technical specification included in this technical catalogue. Airtight Ducting System Internal ducts and fittings of pre-insulated IZOL ® system are the SPIRAL ® system. SPIRAL®...

Open the catalog to page 4

IZOL®system pre-insulated round ducts Download Wentyle Download AlnorCAM Order in B2B Ordering Product code: Standard ducts length L = 3000 mm t = standard thickness for SPIRAL ducts type SPR. Provided with external corrugation from diameter 250 mm, which increases stiffness and compression strengths. Pre-insulated ducts and fittings *standard SPRI-10-125 is made the outer jacket of diameof ter d = 160mm, it is possible to order the execution of the outer jacket with a diameter of 150mm, then the sign is as follows: SPRI-10-125-150 isolation 16 mm ALNOR® ventilation systems ALNOR® is a registered...

Open the catalog to page 5

IZOL®system pre-insulated bends Download Wentyle Download AlnorCAM BSLI - pre-insulated bend consists of inside bend with EPDM gasket and outside bend without EPDM gasket Product code: BSLI - 25 - 200 - 90 *standard BSLI-10-125-90 is madeoftheouterjacket of diameter d=160mm, it is possible to order the execution of the outer jacket with a diameter of 150mm, then the sign is as follows: ALIMOR ventilation systems ALN0R® is a registered trademark and a technical patent protected by law. Any and all changes made by any unauthorized persons and/or entities is strictly prohibited

Open the catalog to page 6

IZOL®system pre-insulated bends Download Wentyle Download AlnorCAM Order in B2B type isolation d angle Ordering Product code: BSLI - pre-insulated bend consists of inside bend with EPDM gasket and outside bend without EPDM gasket *standard BSLI-10-125-60 is made the outer jacket of diaof meter d=160mm, it is possible to order the execution of the outer jacket with a diameter of 150mm, then the sign is as follows: BSLI-10-125-150-60 Pre-insulated ducts and fittings ALNOR® ventilation systems ALNOR® is a registered trademark and a technical patent protected by law. Any and all changes made by...

Open the catalog to page 7

IZOL®system pre-insulated bends Download Wentyle Download AlnorCAM Order in B2B Pre-insulated ducts and fittings *standard BSLI-10-125-45 is made of the outer jacket of dia meter d=160mm, it is possible to order the execution of the outer jacket with a diameter of 150mm, then the sign is as follows: BSLI-10-125-150-45 type isolation Ød angle Ordering Product code: BSLI - pre-insulated bend consists of inside bend with EPDM gasket and outside bend without EPDM gasket ALNOR® ventilation systems ALNOR® is a registered trademark and a technical patent protected by law. Any and all changes made...

Open the catalog to page 8

IZOL®system pre-insulated bends Download Wentyle Download AlnorCAM BSLI - pre-insulated bend consists of inside bend with EPDM gasket and outside bend without EPDM gasket Product code: BSLI - 25 - 200 - 30 * standard BSLI-10-125-30 is made of the outer jacket of diameter d=160mm, it is possible to order the execution of the outer jacket with a diameter of 150mm, then the sign is ALIMOR ventilation systems ALN0R® is a registered trademark and a technical patent protected by law. Any and all changes made by any unauthorized persons and/or entities is strictly prohibited

Open the catalog to page 9

IZOL®system pre-insulated bends Download Wentyle Download AlnorCAM Order in B2B Pre-insulated ducts and fittings *standard BSLI-10-125-15 is made of the outer jacket of diameter d=160mm, it is possible to order the execution of the outer jacket with a diameter of 150mm, then the sign is as follows: BSLI-10-125-150-15 type isolation Ød angle Ordering Product code: BSLI - pre-insulated bend consists of inside bend with EPDM gasket and outside bend without EPDM gasket ALNOR® ventilation systems ALNOR® is a registered trademark and a technical patent protected by law. Any and all changes made...

Open the catalog to page 10

IZOL®system pre-insulated reducers Download Wentyle Download AlnorCAM RSCLLI - pre-insulated reducer consists of inside reducerwith EPDM gasket and outside reducer without EPDM gasket Product code: RSCLLI -25 - 200 -125 *standard RSCLLI-10-125-15 is made of the outer jacket of diameter d=160mm, it is possible to order the execution of the outer jacket with a diameter of 150mm, then the sign is ALIMOR ventilation systems ALN0R® is a registered trademark and a technical patent protected by law. Any and all changes made by any unauthorized persons and/or entities is strictly prohibited

Open the catalog to page 11

IZOL®system pre-insulated reducers Download Wentyle Download AlnorCAM ALIMOR ventilation systems ALN0R® is a registered trademark and a technical patent protected by law. Any and all changes made by any unauthorized persons and/or entities is strictly prohibited

Open the catalog to page 12

Open the catalog to page 13

Marine equipment

Marine equipment

Catalog excerpts

All ALNOR Ventilation Systems catalogs and technical brochures