COMPRESSOR SYSTEMS MADE IN GERMANY ALmiG Compressor Systems

The energy consumed for the generation of compressed air is converted almost entirely to heat. This is a high potential for savings since one compressed air station with a power requirement of 75 kW during 4000 operating hours, for example, will need approximately 300,000 kWh of power every year. Use this energy in the form of: • Warm air to supplement space heating • Warm water to support central heating • Warm water for industrial water Heat energy at no additional cost to you! The cost of fuel oil, gas, and other forms of energy continues to rise. As a result, the use of energy will increasingly...

Warm air for space heating Warm water for heating purposes Heat for industrial process water Possible temperature level: 20 – 25°C above the ambient temperature Possible water temperature up to 70°C Possible water temperature up to 70°C Heated cooling air is used via a duct for space heating Compressor oil gives its heat to the heating water via plates up to usable thermal energy Even in the case of leaks, safety heat exchanger prevents oil from entering industrial water High energy cost savings possible per compressor (see table on left) 76% from the oil cooler 14% from the aftercooler 6% from...

COMPRESSOR SYSTEMS MADE IN GERMANY ALMiG Kompressoren GmbH Adolf-Ehmann-Straße 2 73257 Köngen, Germany Tel: +49 (0)7024 9614-0 [email protected] www.almig.com Subject to errors and modifications.