FUTUR Series
8Pages

Expert for the So utions Semiconductor Industry Where Innovation Flows AIR-OPERATED DOUBLE-DIAPHRAGM PUMPS

Four material versions (T, H, E, S/SH) for different applications Cylinder valves with surface sealing All models contain no metal (T, H, E) Compact, simple design with few parts, very low space required Patented, contactless cascade sealing between the product chambers Machined from solid blocks Easy to dismantle and assemble No elements to fix, such as tie rods, nuts, or clamps Straight-through flow pattern, only one wetted housing part Separate pulsation damper available for all materials and sizes PERSWING P® air control system requires no lubrication or maintenance Diaphragm and/or...

Since 1991 Almatec manufactures pumps of the FUTUR family, which are designed specifically for chemical supply and circulation in the semiconductor industry. The liquids handled in the semiconductor industry have different demands, requiring a unique pump to meet those demands. Today the 4th and 5th generations of Futur pumps were manufactured. FUTUR Series pumps are self-priming air-operated diaphragm pumps which have the capability to run dry. The liquid flows straight through the product chambers of the center housing, while the air control system and the air chambers are located in the...

MODEL FUTURT When delivering acids and caustics, corrosion resistance is of the highest importance, so the center housing is constructed of special PTFE-TFM. Compared to normal PTFE, it has a higher tensile strength and surface density. Parts made of this material are smooth and free of pores, which results in reduced particle generation.The pumps are absolutely metal-free and can be used in temperature ranging up to 130°C (266°F). Applications • Acids • Caustics • FHigh purity chemicals Materials • Center housing: PTFE-TFM • Side housings: Polyethylene Pump Sizes & Performance • 10T (10...

MODEL FUTUR H Metal-free FUTUR H pumps have been designed to operate ideally in hot applications involving acids and caustics. The temperature limit is 200°C (390°F) at max. 2 bar (29 psig). Applications • Hot applications with acids • Hot applications with caustics Materials • Center housing: PTFE-TFM • Side housings: PTFE conductive Pump Sizes & Performance • 10H (10 l/min / 2.6 gpm) • 20H (20 l/min / 5.3 gpm) Futur S/SH pumps are constructed of stainless steel (316L) with extremely low carbon content. The housing parts are machined from a solid block of rolled steel and polished...

Pulsation Dampers and Special Equipment Due to their design, oscillating displacement pumps deliver a pulsating flow. This pulsation is considerably reduced by utilizing the appropriately designed air distribution channels and chambers of the FUTUR series, as well as by the cascade seal. Pulsation dampers (type D) of the same design without tie rods are available for all pump materials and sizes, if the remaining pulsation on the discharge side is unacceptable for a specific application. The installation of a pulsation damper is quick and easy, as it is simply screwed on top of the pump....

TechnicalData Data Max. permitted operating temperature Pump size Dimensions for plastic pumps in mm (inch) Dimensions for stainless-steel pumps in mm (inch) Pump model length width height

Where Innovation Flows PSG® reserves the right to modify the information and illustrations contained in this document without prior notice. This is a non-contractual document. 04-2019 ALMATEC Maschinenbau GmbH Hochstraße 150-152 47228 Duisburg, Germany Tel: +49 (2065) 89205-0 Fax: +49 (2065) 89205-40 info@almatec.de almatec.de Copyright © 2019 PSG®, a Dover company