AIR-OPERATED DOUBLE-DIAPHRAGM PUMPS | PRODUCT BROCHURE Where Innovation Flows

The Almatec® C-Series Air-Operated Double-Diaphragm (AODD) Pump is a cost-effective, reliable and superior-built alternative and features a solid design suitable for a wide array of pumping tasks. The distinctive and proven solid design provides the mass needed for an oscillating pump. The suction and discharge ports are available as separate housing parts. In addition to the standard connection, two further connection footprints are available to match existing installations. The ring tightening structure, good suction head, self-priming and dry run capability as well as the absence of drives,...

FUNCTIONAL PRINCIPLE The ALMATEC C-Series is based on the functional principle of double diaphragm pumps. The basic configuration consists of two external side housings with a center housing between them. Each of the side housings contains a product chamber which is separated from the center housing by a diaphragm. The two diaphragms are interconnected by a piston rod. Directed by an air control system, they are alternately subjected to compressed air so that they move back and forth. In the first figure, the compressed air has forced the left-hand diaphragm towards the product chamber and displaced...

Components of the Almatec® C-Series Pump SUCTION AND DISCHARGE PORTS • Solid construction with form fit to center block BALL VALVES • Separate wetted housing parts • Robust and insensitive to solids • Form a linear seal with the valve seat • Available materials according to the material of the side housings • In addition to the standard connection, two additional connection footprints are available to match existing installations • Available materials: – EPDM – PTFE SIDE HOUSINGS • Solid construction • Integrated metal core, no diaphragm disc • Wetted housing part • Designed for long service...

CENTER BLOCK • Solid construction • Non-wetted housing part • Available materials: - PE - PE conductive - Polyamide (PA) conductive, for PTFE side housings to allow higher temperatures (optional equipment) • Diaphragm monitoring via a capacitive sensor installed in the muffler of the pump (code D) • Stroke counting by a sensor installed in the center block of the pump (code C) • Center block in PA conductive for higher temperatures (code A) • NPT-female threaded air inlet (code AN) • Housing gaskets in FEP instead of standard FKM for pumps with PTFE internals (code FP) The housings, ports and...

VISCOSITY AND PUMP CAPACITY The capacity specified in the pump performance charts generally refer to water (1 mPa-s). The value must be reduced correspondingly when pumping liquids with higher viscosity. The design capacity can be read off directly from the graph and the corresponding pump size selected. The example shown here is based on a required capacity of 10 m3/h with a product viscosity of 6000 mPa-s. The dash-dotted line intersects the design capacity scale at 17 m3/h. ALMATEC® | C-SERIES AODD PUMPS

C-Series Pump | Performance Charts Total head 7 bar 2 bar The following data refer to water at 20°C / 68°F (referring to DIN EN ISO 9906). 30 100 70 20 Total head Total head Total head Pump capacity Pump capacity Total head Total head Pump capacity Pump capacity Total head Total head Total head Pump capacity Total head Total head Total head Pump capacity Pump capacity Total head

PSG Almatec Maschinenbau GmbH HochstraBe 150-152 47228 Duisburg, Germany P: +49 (2065) 89205-0 [email protected] almatec.de Where Innovation Flows ALM-80000-C-03-A4 Authorized PSG® Partner: Copyright 2019 res* a Dover company PSG® reserves the right to modify the information and illustrations contained in this document without prior notice. This is a non-contractual document. 08-2018