Product flyer 3D nesting software for volume cutting (foam, stone, wood, etc.) almaCube is a powerful 3D nesting software intended for professionals specialized in cutting materials such as foam, polystyrene, polyurethane, marble, wood but also deep-frozen food. From a set of raw-material blocks and a set of outputs to be produced, almaCube automatically calculates the 3D layout using a powerful optimization algorithm. This results in an optimized use of material, and therefore, significant material and time savings. Main functions • Production management and ERP interface. • Management of minimum and maximum requests. • Minimization of offcuts and generation of reusable offcuts. • Priority re-use of offcuts. • Multiple outputs management. • Selection of the best material to use. • Selection of optimization time. • Cutting plans adapted to the functional characteristics of the machines (edge to edge cutting, etc.) and to the different cutting technologies (wire, blade, saw, etc.) • Cutting of foam blocks (mattresses, seats, cushions, etc.) • Cutting of marble, granite, limestone, dolomite blocks (gravestone, ashlars). • Cutting of fallen trees (beam, rafter, joist, timber, etc.) • Cutting of graphite sheets. • Cutting of parallelepiped metal blocks. • Cutting of polystyrene, PVC, rubber, etc. • Cutting of frozen food. Alma CAM software 15, rue Georges Perec - F-38400 Saint-Martin-d’Hères Tel. +33 4 76 63 76 20 - [email protected] Advantages and benefits • Material and time savings: almaCube allows you to quickly create very compact 3D assemblies. • True 3D nesting instead of a plain layer piling-up. • Optimized use of material both in terms of filling of a single block and of selection of the best blocks. • Management of cutting process requirements. • Easy coupling with Production Management and ERP systems. • Easy to use.