The programming and nesting software for oxy-cutting and plasma cutting Thanks to its ability to meet specific machine requirements, including heat constraints, involved in oxy-cutting and plasma cutting, Almacam Cut is a powerful and flexible solution which efficiently combines automation and user interaction, when required. High-performance automatic nesting (in terms of efficiency and calculation time) thanks to the availability of multiple nesting strategies. Optimized multi-torch cutting control and ability to pilot machines equipped with programmable torches. Optimized use of remnant sheets or off-cuts of any shape. One click to perform the nesting, the tool path, and NC program generation. Use of several methods to reduce the number of piercings on the sheet : continuous cutting (positive or negative bridges), chain cutting, common cut between two parts. Efficient control of heat deformations. Lead-ins/outs calculation to avoid burrs. Ability to pilot programmable beveling heads.

Almacam Punch advantages for oxy-cutting and plasma cutting CUT Significant material savings • Significant reduction of loss rate thanks to automatic nesting performance, resulting from several available strategies. • Multi-torch nesting available either in automatic or interactive mode, with the calculation of the smallest gap between the torches, lower than the height of parts that can be embedded with themselves; possibility to combine multi- and mono-torch cutting in a single nesting. • Optimized management of remnant sheets and off-cuts of any shape. Programming time reduced to the minimum...