ALLU PMX & PF Stabilisation System New concept for soil improvement

Soil Stabilisation method Stabilisation is a process to improve the strength and durability of soil. This can be reached by mixing an appropriate amount of binder agent with the soil. Mass Stabilisation Method Mass Stabilisation is a method to stabilise soft soils by adding binders in order to reduce settlements and/or to improve the stability of the land. It can be a quick and cost effective solution compared to the traditional method of piling or mass change. For example different kinds of clay, peat, sludge, and soft soil can be transformed into solid layers by using the stabilisation method....

Applications for soil stabilisation Stabilisation at road and ground constructions Stabilisation of dredged sludge • Foundations for industrial buildings and bridges • Yards, parking places, sports grounds and storage construction sites • Protection of adjacent structures • Reduction of earth pressure • Stabilisation of very soft soils for tunnel boring • Road, street and railway construction sites • Foundations for pools, landfill areas etc. • Protection layers under the water • Cable/pipe channel construction sites • Noise embankments • Ground water protection layers • Slopes of the rivers,...

ALLU Stabilisation products ALLU PMX Power Mixer is a versatile hydraulic operated mixing unit for excavators. When it is attached to an excavator the combination converts to an easily movable and effective mixing plant. The ALLU PMX can easily be mounted on an excavator with pin mounting or with quick hitch adapter plate. Intelligent construction The ALLU Power Mixer is able to handle effectively various difficult materials like clay in different forms, peat, sludge, mud and contaminated soil. The ALLU PMX penetrates through hard crust layers and mixes the soils effectively. The mixing effectiveness...

ALLU PF 7 & PF 7+7 The ALLU PF Pressure Feeder, using compressed air, inject through a feeding pipe the binding agent beneath the ground, directly to the middle of the mixing drums on the PM. The unit is mounted on a tracked chassis and is remotely controlled allowing the unit to follow behind the lead excavator onto the site. Compressor: Working pressure Capasity Tank: Maximum working pressure Volume Feeder: Feeding capacity, adjustable Option: Bag filter for decrease dust filling procedure ALLU PFM 10+10 The ALLU PFM (Pressure Feeder Mobile) for feeding dry binders is mounted on a trailer that...

Projects using ALLU Stabilisation equipment Industrial and Parking Area Kivikko is situated in the eastern side of Helsinki, the capital of Finland. Approximately 12 hectares (29.65 acres) of the lots and streets in Kivikko are situated on soft swamp and are completely unsuitable for construction purposes. In this area two separate stabilisation tests were carried out, in the first area mass stabilisation only and in the second mass and column stabilisation. In the first area mass stabilisation was applied to a depth of 3 meters (9.8 ft). The result was a solid platform 3 meters deep that will...

High Speed Railroad Construction One of the recent contracts where the ALLU Stabilisation System has been in operation is a high speed railway line construction site on soft peat in southern Finland. The ALLU Stabilisation System is used to strengthen the soft peat creating a working platform for a 70 tonnes (140 000 lbs) piling rig. The binder agent provided by the ALLU PF is mixed using the ALLU PM (in-situ) to a depth of 5 m (16.4 ft). Previously, it would have been necessary to excavate the entire area and fill the void with stone. This would create all sorts of problems for the contractor:...

ALLU products for soil improvement ALLU Screener Crusher ALLU Stabilisation System Screening, crushing, mixing, aerating, and loading in one step operation ALLU Compacting Plate Mixing soil and binding agent in mass stabilisation High power compacting plates for demanding job sites ALLU Finland Oy Jokimäentie 1, 16320 Pennala, FINLAND Tel: +358 3 882 140 Fax: +358 3 882 1440 Email: [email protected] ALLU Deutschland GmbH Klöcknerstraße 3, 32257 Bünde, GERMANY Tel: +49 5223 180 150 Fax: +49 5223 180 1515 Email: [email protected] ALLU France S.A.R.L 4 rue du Docteur Guyot, 21420 Savigny-lès-Beaune,...