ALLU EPM

ALLU EPM

ALLU EPM

Product catalog summary
Introduction
The ALLU e.p.m Powder Spreader is an innovative tool designed for efficient soil improvement and stabilization, particularly useful in projects like backfilling pipeline trenches and road construction. It allows for precise application of binding agents directly to the required area, adapting to various soil conditions.
Specifications
The spreader can be attached to an excavator or loader and is hydraulically driven to adjust the volume accurately. It holds 1.40m³ of powder and can be refilled from a larger storage bin. The recommended carrier machines are loaders (5-12 tons) and excavators (10-30 tons).
Benefits
  • Reduces water content and plasticity of soil.
  • Improves soil compactibility and bearing capacity.
  • Significant cost savings compared to traditional soil exchange methods.
  • Independence from increasing dumping costs and environmental requirements.
  • Reduced risk from weather conditions due to quick setup and processing times.
  • Better utilization of existing machinery on site.
Cost Analysis
Traditional soil exchange costs approximately 22.00 €/m³, while using the ALLU e.p.m system reduces costs to 5.50 €/m³, resulting in savings of 18.50 €/m³.
Working Principle
The process involves spreading the binding agent with the e.p.m container, followed by mixing and screening with the ALLU Screener Crusher. Stones are screened out and can be reused or crushed. The final step involves compression with a hydraulic-driven ALLU VP compacting plate.
Contact Information
ALLU has offices in Finland, Germany, France, USA, UK, China, and South America, providing global support and sales services.
See more

Catalog excerpts

ALLU EPM-1

Easy and cost effective soil improvement and soil stabilisation Powder Spreader

 Open the catalog to page 1
ALLU EPM-2

Easy and cost effective soil improvement and soil stabilization ALLU e.p.m Powder Spreader is a new innovative container to spray the binding agent onto the soil in stabilisation projects e.g. by backfilling pipeline trenches or in road construction. The advantage of e.p.m process is, that the binding agent can be spread directly to the right place and the volume required can be adapted to different soil conditions. ALLU e.p.m Powder Spreader can be easily fitted to an excavator or loader. The hydraulic driven pump adjust accurately the volume. ALLU e.p.m Powder Spreader can hold 1,40m³ of powder...

 Open the catalog to page 2
ALLU EPM-3

Advantages for contractor when using ALLU e.p.m • Savings in transport and dumping costs • Savings in exchange material costs • Higher certainty in price calculations because of some easily misjudged factors in a calculation (like diversions, road blocks, closing of dump yard nearby) become no longer necessary • Independence of increasing dumping costs and environmental requirements • Reduced risk factor of weather conditions thanks to short set-up times and fast processing. Difficulties to supply and transport exchange material to the building site in case of bad weather will be eliminated •...

 Open the catalog to page 3
ALLU EPM-4

ALLU products for soil improvement ALLU® Screener Crusher Screening, crushing, mixing, aerating, and loading in one step operation ALLU® Stabilisation System ALLU® Compacting Plate Mixing soil and binding agent in mass stabilisation High power compacting plates for demanding job sites ALLU Finland Oy Jokimäentie 1, 16320 Pennala, FINLAND   Tel: +358 3 882 140 Fax: +358 3 882 1440   Email: [email protected] ALLU Deutschland GmbH Klöcknerstraße 3, 32257 Bünde, GERMANY   Tel: +49 5223 180 150 Fax: +49 5223 180 1515   Email: [email protected] ALLU France S.A.R.L 4 rue du Docteur Guyot, 21420 Savigny-lès-Beaune,...

 Open the catalog to page 4

All ALLU Finland Oy (Ltd) catalogs and technical brochures

  1. ALLU PMX & PF

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.