- Catalogs
- Allied High Tech Products
- TechPress 2?
TechPress 2?
TechPress 2?
- Prepares up to 2 mounts in 7 minutes.
- Controlled via touch-pad switches with a backlit LCD display.
- Easy mold assembly changes from 25 mm to 2 inches.
- Programmable for up to 50 mounting steps.
- Impact, corrosion, and heat-resistant cover with a swing-away mold cap.
- Visual and audible alarms for cycle completion.
- Nonconductive bayonet handles remain cool during operation.
- Password-protectable menus.
- Heating power of 1600 W and molding pressure up to 5500 PSI/379 Bar.
- Temperature range: 0-200°C/32-392°F; Time range: 0-60 minutes for preheat/molding and cooling.
- Dimensions: 18" W x 22" D x 28" H; Weight: 98 lb.
- Two-year warranty covering parts and labor.
- Phenolic Powders & Preforms: Available in black, green, red, and orange for routine applications and color-coding. Orange offers excellent chemical resistance and photographic contrast.
- Transparent Thermoplastic Powder: Clear material for easy sample observation.
- Blue Diallyl Phthalate Powder: Glass or mineral-filled for excellent edge retention and chemical resistance.
- Conductive Powder: Copper-based for conductive samples suitable for scanning electron microscopy.
- Black Glass Filled Epoxy Powder: Hard epoxy with glass fiber filler for excellent adhesion and edge retention.
Catalog excerpts
Product Brochure TechPress 2™ Mounting Press Prepare Up To 2 Mounts in 7 Minutes Touch-Pad Switches Control All Functions Programmable Up To 50 Mounting Menus Easy to Change Mold Assemblies: 25 mm - 2"
Open the catalog to page 1
TechPress 2™ Mounting Press TechPress 2™ Mounting Press The TECHPRESS 2™ hydraulic-pneumatic automatic mounting press is used to encapsulate samples for metallographic preparation. The microprocessor based system allows up to 50 mounting steps to be programmed, including cycle start/stop, preheating time and temperature, heating time and temperature, predefined mold pressures or manual pressure control and cooling time. Temperature is displayed in both Fahrenheit and Celsius throughout the mounting procedure. Two mounts can be produced at one time using the duplexing spacer. Depending on mold...
Open the catalog to page 2
Compression Mounting Compression mounting is an economical method of encapsulating samples that can withstand the pressure and heat of the mounting process. A variety of mounting powders and preforms are available for this application. Phenolic Powders & Preforms Black, green and red phenolics are used for routine applications when color-coding for material identification, or as backfill for more expensive mounting powders. Orange phenolic offers excellent chemical resistance and provides better photographic contrast and edge retention. Preforms require no measuring, are cleaner than loose powder...
Open the catalog to page 3
Equipment is subject to change due to innovations/improvements at any time. Document No: D30-10XXPBV1.0 Allied Equipment and Fixtures are Designed and Manufactured by Allied in the United States • 2376 East Pacifica Place, Rancho Dominguez, California 90220 USA • • (800) 675-1118 (US/Canada) • (310) 635-2466 (worldwide) • www.alliedhightech.com •
Open the catalog to page 4All Allied High Tech Products catalogs and technical brochures
Allied 201988 Pages
HR-60016 Pages
M-PREP 5X™4 Pages
TECHCUT 5X™12 Pages
X-Mill4 Pages
MetPrep 3?/PH-3?8 Pages
PowerCut 10?4 Pages
THE MUltIPREP SYStEM12 Pages
ALLIED - Product Catalog72 Pages
- Cutting system
- Metal cut-off machine
- CNC cutting center
- Automatic sawing line
- Indentation hardness tester
- Plastic cutting machine
- CNC milling machine
- Vertical CNC milling machine
- Benchtop hardness tester
- 3-axis CNC milling machine
- Digital display hardness tester
- Cut-off saw
- Precision saw
- Polishing unit
- Rockwell hardness tester
- Brinell hardness tester
- Automatic hardness tester
- Waterjet cutting system
- Universal CNC milling machine
- Grinding polishing machine