PowerCut 10?
4Pages

PowerCut 10™ Abrasive Cut-Off Saw 10" Blade Capacity Powerful 3.5 HP, 3 Phase Motor Impact/Corrosion Resistant Construction Accepts Blades With Either 1¼" or 32 mm Arbor Dual T-Slot Tables Allow Flexible Vise Positioning Quality Products for Metallographic Sample Preparation & Analysis

PowerCut 10™ Abrasive Cut-Off Saw A powerful, bench-top abrasive cut-off saw for sectioning various types and sizes of metallographic samples. The PowerCut 10™ uses blades ranging from 8 to 10 inches in diameter, allowing materials up to 3 inches thick to be sectioned. A side port accommodates longer samples such as bar stock. 10-inch diameter blade capacity Blades with either 1¼-inch or 32 mm arbor hole can be used Powerful 3.5 HP (2500 W) motor, 3450 RPM Cutting capacity: Up to 3-inch bar stock Bench top mountable Stainless steel Quick-Slide vise with 3-inch capacity Two (2) T-Slot tables...

Inc. Products, Tech High The optional Cabinet/ Stand is also useful for blade, tool and coolant tank storage T-Slot Tables with Vertical Adjusting Clamps Dual vises allow burr-free cutting

Abrasive Cut-Off Blades Allied’s Abrasive Cut-Off Blades are specially formulated for metallographic sectioning. Ideal for reducing thermal damage to minimize structural deformation, they are available in Aluminum Oxide, Silicon Carbide, Diamond or CBN (cubic boron nitride) mineral. Rubber bonded blades provide excellent wear rates, while resin and rubber/resin provide a cooler cut, making them an excellent choice for harder metals and delicate/brittle materials. Available in 9" (225mm), 10" (250mm), 12" (300mm) and 14" (350mm) diameter, all blades are standard with an arbor hole that fits...