Mini-Series-Filter-Housings
2Pages

MINI SERIES ALLIED FILTER SYSTEMS OFFERS A RANGE OF MINI BAG FILTER HOUSINGS IDEALLY SUITED TO SMALL BATCH OPERATIONS. These compact bag filters are manufactured as standard using stainless steel 316L, and have an exterior bead blasted finish. All mini filter housings are 110oC and 10 bar rated. Depending on model, they can be CE Marked and can have ATEX certification. Optional features are available to meet all customer requirements (See pages 16,17). The standard range includes three models in two different sizes: HD 13 AND 14 Flush top bag fitting, with laser cut profile top held in place by two reclining swing bolts with eye nuts. One of the nuts acts as a hinge to the top cover. RBFP 13 AND 14 Recessed bag fitting with profiled body, with tri-clover lid held in place by three reclining swing bolts with eye nuts. One of the nuts acts as a hinge to the top cover.

MODEL CODE NUMBER OF FILTER BAGS FILTRATION SURFACE AREA (m 2) INLET/ OUTLET SIZE (inches) MAXIMUM FLOW RATE* GPM RBFV 13 AND 14 Recessed bag fitting with profiled body and V-clamp closure lid design. *Maximum flow rate is based on aqueous flow at ΔP=1.0psi clean through filter only without bag installed. Achieved flow rate is dependant on type of fluid being filtered, fluid viscosity and temperature, micron rating and type of filter bag. SPECIFICATION 1” BSP (F) drain standard on all side outlet vessels (HD style 1 (inline), and all models styles 3,4,7,8). ¼” BSP (F) plug standard on inlet...