Other Safety Related Products
10Pages

Other Safety Related Products All switches excluding Ferrogard GS2 The Guardmaster Ex Range of safety switches are specifically designed for potentially explosive atmospheres. They retain the safety features and operating principles of the conventional Guardmaster switches. They incorporate a sealed flameproof contact block, making them suitable for use in European Zone 1 and Zone 2 environments. In the US and Canada, these products can be used in areas classified as Class 1, Division 2 in Groups A (acetylene), B (hydrogen), C (ethylene) and D (propane). All the Guardmaster Ex switches...

Other Safety Related Products Ex Range Product Selection 15 m (39.2 ft) 440K-H11161 3 m (9.8 ft) 440N-H02047 10 m (32.8 ft) 440N-H02087 2 N.C. GS2-Ex (stainless steel) Ex Ferrogard GS2. Explosion proof magnetically actuated, noncontact safety interlock switches. 440K-H11160 1 N.C. Ferrogard GS2-EX (stainless steel) 1 N.C. & 1 N.O. Ex Lifeline 4. Explosion proof, cable and push button actuated Emergency Stop switch. 440E-H13046 2 N.C. 440E-H13069 Lifeline 4-EX 2 m (6.5 ft) 1 N.C. & 1 N.O. 440H-H03077 Operator Interface Safety Switches Rotocam-HS-2-EX Logic Ex Rotacam. Explosion proof, hinge...

Other Safety Related Products Intrinsically Safe Galvanic Isolators Overview General Principles Intrinsically Safe Galvanic Isolators Accessories Description 9-Galvanic Isolators For applications involving sensor use in hazardous locations, Rockwell Automation offers a line of Intrinsic Galvanic Isolators, which offer economical solutions for instrumentation and control systems in hazardous locations as defined by NEC article 500 and CEC Part I, Section 18. Intrinsically Safe or Galvanic Isolators are active protective interface assemblies that limit the amount of energy allowed to enter a...

Other Safety Related Products Intrinsically Safe Galvanic Isolators • DIN rail mounting with power bus option • Removable field connection terminals • Single- and two-input versions • Variety of output types • Approvals to worldwide standards • Intrinsically safe connections for Class I, I (EExIa), IIC/IIB Dimensions are not intended to be used for installation purposes. Unit Label Product Selection Note: Safety parameters stated above are per input. Visit our website: www.ab.com/catalogs

Other Safety Related Products Intrinsically Safe Galvanic Isolators Safeguarding Applications General 24VDC Wiring intrinsically safe systems must be identified as such through the use of light blue jacketing or appropriate labels. Such labels are required by NEC Article 504 and ANSI/ISA RP-12.6 to be placed at no more than 25 foot intervals. When installing intrinsically safe equipment, the user should refer to all relevant national standards and those standards set forth by the authority under jurisdiction at the installation site. Principles Hazardous Location U.S. Class I,II,III, Div...

Other Safety Related Products Accessories Galvanic Isolators Approximate Dimensions [mm (in.)] 11 (0.43) General Dimensions are not intended to be used for installation purposes. 2 1 2 1 11 (0.43) 4 5 11 (0.43) 11 (0.43) 18 (0.71) Principles 4 5 3 3 16 (0.63) 20 (0.79) Figure 1: Power Bus Screw Terminal Connector Rockwell Automation Galvanic Isolators can be daisy chained together via power bus connectors. The snap-on connectors save time and simplify wiring for power distribution and error identification on a series of modules. Each end on a string of bussed isolators is terminated with a...

Other Safety Related Products Accessories Intrinsically Safe Wiring Labels/DIN Mounting Rail Intrinsically Safe Wiring Labels INTRINSICALLY SAFE WIRING General 897H-L2 Figure 1 Figure 2 897H-L3 INTRINSIC SAFETY GROUND 897H-L1 INTRINSIC SAFETY GROUND INTRINSICALLY SAFE WIRING 897H-L1 897H-L3 INTRINSICALLY SAFE WIRING Figure 3 Description Principles It is recommended that wiring for intrinsically safe systems be identified as such through the use of light blue jacketing and/or through appropriate labels. Such labels are required by NEC Article 504 and ANSI/ISA RP–12.6 to be placed at no more...

Other Safety Related Products Accessories DC Micro Style, 22 AWG Blue PVC Cordsets and Patchcords Pinout and Color Code Face View Pinout 5 General 4-Pin 2 2 5 1 1 3 4 3 Female 4 Male Color Code Brown White Blue Black NA Principles 1 2 3 4 5 As defined in the National Electric Code (NEC), intrinsically safe wiring must be identified by color coding with light blue jacketed cable or by labeling at regular 25 foot or less intervals. When installing intrinsically safe equipment, the user should refer to all relevant national standards and/or those standards set forth by the “authority having...

Other Safety Related Products Lifeline 4 and Rotacam Specifications IEC 60947-5-1, ISO 14119, ISOTR 12100 Standards Pneumatic Lifeline 4 General Standards Pnuematic Rotacam IEC 60204-1, IEC 60947-5-1, ISO 14119, ISOTR 12100, IEC 60204-1, ISO 13850 Compressed air or neutral gas Pressure Range 2…8 bars Passage Diameter 2.7 mm Connection Type Principles Pneumatic Fluid Push in fittings for standard 4 mm Ø nylon tube, internal Ø 2.5 mm Flow Rate 138 NL/min. (ie., number of liters of air at normal atmospheric pressure obtained with the output open to atmosphere and the supply pressure at 4...