CENTERLINE 2500 MCC Product Profile
6Pages

CENTERLINE® 2500 Motor Control CentersHigh Performance Motor Control Centers and Switch Gear Meeting IEC 61439-2 Product Description Allen-Bradley® CENTERLINE 2500 motor control centers (MCCs) are designed to address the wide range of application requirements found throughout the world. By combining a smaller footprint and comprehensive type testing, the CENTERLINE 2500 MCC helps meet customers' needs and growing worldwide demand for factory-ready, space-, energy- and cost-efficient motor control solutions. Product Features • Designed to IEC 61439-2 standards • Flexibility to select fixed or withdrawable unit designs - Fully withdrawable unit design for faster replacement helps reduce repair time - High withdrawable unit density up to 24 units per column • Built-in EtherNet/IP networking options to help assure reliable communication • ArcShield™ arc resistant enclosures help you reduce arc flash hazards. Tested in accordance with IEC/TR 61641 • Three and four wire bus bar power systems available to help meet your local requirements Available fully assembled with a factory-installed, preconfigured and validated EtherNet/IP network infrastructure - CENTERLINE 2500 MCCs are manufactured in facilities throughout the world so users can have a fully operational unit installed and operating much quicker than other motor controllers. CENTERLINE MCCs with IntelliCENTER® technology are fully-assembled MCCs with a factory-installed, preconfigured and validated EtherNet/IP network. In addition to the programming and networking infrastructure, the user interface can also be preconfigured, so the system is truly plant-floor ready when delivered. Thanks to this extensive pre-configuration and pre-testing program, users have the potential to save up to 90% on development, commissioning and installation time. • Local manufacturing, sales and service for faster start-up, commissioning and continued support • In-region project management ensures smooth global coordination • Complete engineering capabilities deliver value for your solution LISTEN. THINK. solve: @ Allen-Bradley • Rockwell Software Rockwell Automation

Structure Features Proven CENTERLINE busdesign provides: • Improved heat dissipation • Easier installation and maintenance • Increased current carrying capacity, 600 or 1200 ampere loading per column • Reduces energy used Horizontal to vertical bus connection Two-bolt connections minimize the likelihood of "hot spots" Requires no periodic maintenance Optional double-front construction maximizes placement flexibility (Single-front unit design shown) 600, 700, 800, 900 or 1000 mm column widths for design flexibility 2300 mm tall and 600 or 800 mm deep Accommodates up to 24 modules Three and...

Unit Features Disconnected position – completely disconnects power and control connections Unit can be padlocked in all positions Standard Unit IntelliCENTER technology improves the intelligence of your MCC with built-in networking to capture information used for predictive maintenance, process monitoring, and advanced diagnostics Incomer shown with air circuit breaker, which is also available with molded case circuit breaker • Main Tie Main and other distribution Scalable motor control options • Optional automatic transfer switches Soft-starters Across-the-line starters Variable frequency...

Safety The CENTERLINE 2500 MCC provides you with improved safety features part of the standard offering, as well as optional safety features. Pressure Relief System (on top of each section of CENTERLINE 2500 MCC with ArcShield) Unit monitor view of IntelliCENTER software showing advanced diagnostics and trip status • Arc containment features, available with the ArcShield™ option, help protect against arc-flash hazards in the event of a fault • Advanced diagnostics of IntelliCENTER software provide remote access to data and troubleshooting, minimizing the need for local entry • Lock-out...

IntelliCENTER Technology IntelliCENTER technology enhances the intelligence of an MCC by using built-in networking to capture information used for predictive maintenance, process monitoring, and advanced diagnostics. • IntelliCENTER software puts both real-time diagnostics and MCC documentation at your fingertips by allowing you to monitor from anywhere in the enterprise • ActiveX controls allow seamless integration into RSView® and interfaces with third party visualization packages • Faster start-up – Networking reduces complex interwiring to a single cable – Factory network...

(1) Up to 600 A top and bottom, effective 1200 A per column. (2) The average temperature over a 24-hour period must not exceed 35 °C. Allen-Bradley, ArcShield, CENTERLINE, IntelliCENTER, LISTEN. THINK. SOLVE. PowerFlex, Rockwell Software, RSLogix, RSView and Studio 5000 are trademarks of Rockwell Automation, Inc. EtherNet/IP and DeviceNet are trademarks of the Open DeviceNet Vendor Association. Trademarks not belonging to Rockwell Automation are property of their respective companies. Power, Control and Information Solutions Headquarters Americas: Rockwell Automation, 1201 South Second...