AF-1108-B VOLUMETRIC PISTON FILLER MODEL 305 For Liquids, Creams, Pastes and Other Viscous Products All-Fill’s Model 305 Piston Filler is a versatile single head piston filler for liquids, creams, pastes, and other viscous products. Fill volumes can range from 50ml. to 2.5 liters per cycle with up to 60 fills per minute in either manual or automatic operation. During a filling cycle, a piston travels back to draw product from the hopper into a precision machined cylinder, then extends forward to fill. Product is dispensed into the container through a filling nozzle and/or cutoff device. Nozzles are available for single/multiple fill positions, or for specific products. Cutoffs prevent product from dripping after the fill. Figure 1 Portable Work Stand Accessory (Optional) Figure 2 CHARACTERISTICS - All Stainless Steel Construction and Pneumatic Operation ideal for wash-down environments and hazardous locations - Secondary Fill Speed for tapered neck containers - Wide range of Cylinder Sets, Nozzles, Cutoffs, and Accessories - Conveyors and Indexing packages available for fully automatic operation - Simple volume adjustment by hand crank WORLD CLASS SERVICE AND SUPPORT. All-Fill uses quality off-the-shelf components so spares are readily available and costs are reduced. All programming is written and supported by in-house engineers. Figure 3

Dimensions 7.2 gal. capacity Hopper ROTARY VALVE ACTUATOR ROTARY VALVE DUAL CHECK VALVE VARIATION (Models 305B/305C) AIR SERVICE PRODUCT CYLINDER CONTROL PANEL CONTROLS Start Volume Filling Speed Controls operation of the pistion filler Controls amount of product filled during operation Controls the speed at which product is dispensed Secondary Speed Recharge Speed Provides speed control for final 10% of stroke Controls the speed of the recharge (located under the hinged top cover) Dimensions listed as reference only. Not to be used for layout or construction. SPECIFICATIONS Fill Volumes: 1/3...