Catalog excerpts
Technical Data for CODA KMO-Series Mass Flow Meters 40 to 100,000 grams per hour full scale Standard specifications. Consult Alicat for available options. SENSOR AND CONTROL PERFORMANCE Liquid: ±0.6% of reading or ±0.2% of full scale, whichever is greater Gas: ±1% of reading or ±0.2% of full scale, whichever is greater Flow Accuracy Repeatability Flow Measurement Range Density Range (Measurable) Viscosity Range Zero Stability ±0.2% of full scale (included in mass flow accuracy) Mass flow zero shift: ±0.02% of full scale per °C from tare temperature2 Mass flow span shift: ±0.01% of reading per °C from 25°C Temperature Sensitivity Typical Indication Response Time 1 Density reading and density accuracy are independent of the mass flow reading and mass flow accuracy. 2 Mass flow zero shift for 40 g/h is ±0.025% of full scale per °C from tare temperature. MECHANICAL Ambient: 0–60°C Fluid: −35–70°C Consult Alicat for additional options Operating Temperature Range Ingress Protection Wetted Materials 316L stainless steel and FKM standard; FFKM, EPDM or PCTFE optional Consult Alicat for additional wetted materials options COMMUNICATIONS Analog I/O Options Serial and Modbus RTU over RS-232 or RS-485 (default) EtherCAT, EtherNet/IP USB-C and DB-15 (default) M12 (IP rated models) RJ45 (Ethernet equipped models) Electrical Connection Options Power Requirements Powered through DB-15 or M12: 1.4 W, 9–30 Vdc (can also be powered via USB-C) Digital Update Rate Analog Update Rate RANGE-SPECIFIC TECHNICAL DATA Process connections Recommended inlet filter Nominal pressure drop (H₂0) Proof Pressure (PSIA)³ Mounting Options Full scale flow (g/h)
Open the catalog to page 1Technical Data for CODA KMO-Series Mass Flow Meters 40 to 100,000 grams per hour full scale Standard specifications. Consult Alicat for available options. Power Light Tare Button Process Connection Tapped Mounting Holes G DIMENSIONS Full scale flow 40–10,000 g/h 30,000– 100,000 g/h
Open the catalog to page 2All Alicat Scientific catalogs and technical brochures
-
Mass Flow Controller
2 Pages
-
COMPOSER™ and Gas Select
2 Pages
-
L/LC
2 Pages
-
Pressure Controllers
2 Pages
-
Low Pressure Drop Mass Flow
2 Pages
-
Mass Flow Meter
2 Pages
-
Portable Flow Calibrator
2 Pages
-
FP-25
2 Pages
-
P-PSID-Series
2 Pages
-
P-Series
2 Pages
-
PCD3-Series
2 Pages
-
PCD-Series
2 Pages
-
PC3-PSID-Series
2 Pages
-
PC3-Series
2 Pages
-
PC-PSID-Series
2 Pages
-
L-Series
2 Pages
-
PC-Series
2 Pages
-
LC-Serie
2 Pages
-
MCS-Series Controller
2 Pages
-
M-Series
2 Pages
-
MW-Series Meter
2 Pages
-
MCD series
2 Pages
-
MC series
2 Pages
-
MCV series
2 Pages
-
PCU series
2 Pages
-
MS series
2 Pages
-
PRODUCT&TECHNICAL GUIDE
74 Pages
-
Alicat Scientific
72 Pages